Accredited course Outline
Date retreived
22/07/2026 5:22 PM AWST
22/07/2026 5:22 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Furnishing (Timber Flooring)
Certificate II in Furnishing (Timber Flooring)
Accredited course
National Code:
50311
50311
State Code:
1585
1585
TGA Status:
Draft
Draft
DTWD Status:
Approved
Approved
State Implementation and Classification
Approved Date
13/01/2000
Field of Education
040321 - Floor Coverings
AQF Level
Certificate II in
Nominal Hours
670
Duration
Unspecified
Stream of Study
Initial Vocational (3100 - 3600)
Accredited Date
16/03/2000
Expiry Date
31/12/2003
VET Act Classifier
B
VET Act Conditions
Description
To provide training and skill development in the laying of textiles, resilient, and hard floor finishing and covering.
Schedule
1. CORE
GENERAL SKILL AREAS
NOTE The 670 nominal hours refer to institutional delivery only.
When this course is used for Traineeship delivery, the funded hours from the WA Department of Training to the provider will only be to a maximum of 380 hours.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 83004 | ABC504 | Calculations | 24 | Module |
| 83005 | ABC505 | Communications | 40 | Module |
| 83019 | ABC546 | Customer Relations and Services | 20 | Module |
| 83212 | ABC528 | Hand Tools and Equipment (Ff&c) | 20 | Module |
| 83002 | ABC502 | Occupational Health and Safety (1) | 8 | Module |
| 83014 | ABC541 | Occupational Health and Safety (2) | 20 | Module |
| 83214 | ABC529 | Power Tools and Equipment (Ff&c) | 20 | Module |
| 83021 | ABC548 | Quality Principles | 10 | Module |
| 83224 | ABC568 | Specification/Plan Reading (Ff&c) | 30 | Module |
| 83003 | ABC503 | Workplace Environment | 8 | Module |
2. ELECTIVE
TIMBER FLOORING SPECIFIC SKILLS
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 83343 | Basic Timber Flooring Machines | 20 | Module | |
| 83339 | ABC856 | Block Parquetry | 40 | Module |
| 83345 | ABC853 | Floor Coating and Finishing | 60 | Module |
| 83341 | ABC864 | Flooring Repair | 10 | Module |
| 83340 | ABC863 | Installation of Floating Timber and Pre-laminates | 40 | Module |
| 83342 | ABC865 | Installation of Strip Flooring | 40 | Module |
| 83346 | Installation of Structural Flooring | 40 | Module | |
| 83344 | Introduction to Timber Flooring Materials | 20 | Module | |
| 83223 | ABC844 | Planning and Estimating | 20 | Module |
| 83347 | ABC861 | Pre-installation Planning | 40 | Module |
| 83332 | ABC852 | Spare (Not Used) | 40 | Module |
| 83215 | ABC842 | Sub-floor Preparation (Coatings) | 20 | Module |
| 83222 | ABC840 | Sub-floor Preparation (Hard Underlays) | 20 | Module |
| 83221 | ABC841 | Sub-floor Preparation (Sanding) | 20 | Module |
| 83217 | ABC846 | Trims and Accessories | 20 | Module |
| M0492 | Work Placement (Timber Flooring) | 20 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W021 | LMF20102 | Certificate II in Floor Covering and Finishing | Qualification |
VET Info Notes
GENERAL NOTE
When this course is used for Traineeship delivery, the funded hours from the WA Department of Training to the provider will only be to a maximum of 380 hours.
The following details refer to institutional (or non Traineeship) delivery:
The Work Placement (Timber Flooring) module is to be completed as part of the
award.
Work Placement requires at least 100 hours in the workplace and the completion
of a log book by the supervisor. The 20 hours shown are for assessment and co-ordination of the
work placement.
This course is the copyright of Midland College of TAFE on behalf of
the Crown. Training providers who wish to deliver this program must be
registered by their State accrediting body.
The course is accredited by the Training Accreditation Council (TAC)
in Western Australia and has beenplaced on the National Register
as code 50311.
Further information on this program may be obtained from the Principal
Lecturer, or Executive Officer, Courses Committee, Midland College of TAFE, PO Box 1336,
Midland WA 6936, telephone (08) 9274 9261.
When this course is used for Traineeship delivery, the funded hours from the WA Department of Training to the provider will only be to a maximum of 380 hours.
The following details refer to institutional (or non Traineeship) delivery:
The Work Placement (Timber Flooring) module is to be completed as part of the
award.
Work Placement requires at least 100 hours in the workplace and the completion
of a log book by the supervisor. The 20 hours shown are for assessment and co-ordination of the
work placement.
This course is the copyright of Midland College of TAFE on behalf of
the Crown. Training providers who wish to deliver this program must be
registered by their State accrediting body.
The course is accredited by the Training Accreditation Council (TAC)
in Western Australia and has beenplaced on the National Register
as code 50311.
Further information on this program may be obtained from the Principal
Lecturer, or Executive Officer, Courses Committee, Midland College of TAFE, PO Box 1336,
Midland WA 6936, telephone (08) 9274 9261.
No information