Module Outline
Date retreived
22/07/2026 11:58 PM AWST
22/07/2026 11:58 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Welding 2 Processes
Welding 2 Processes
Module
National Code
State Code
85851
85851
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
030711 - Boilermaking And Welding
Nominal Hours
68
Description
To provide students with understanding and practical
skills relating to the processes of thermal-cutting
and gouging, manual and gas metal arc-welding,
braze-welding and brazing.
skills relating to the processes of thermal-cutting
and gouging, manual and gas metal arc-welding,
braze-welding and brazing.
No information
Evidence Guide
Examination 50% Internal
Assessment 50%
The student must pass BOTH components.
Suggested Duration Guidelines
Section 5 - Cutting and Gouging Procedures:
8 lecture + 12 Practice = 20 hours
Section 6 - MMAW Techniques:
6 lecture + 18 Practice = 24 hours
Section 7 - GMA Techniques:
3 lecture + 9 Practice = 12 hours
Section 8 - Braze-Welding and Brazing:
4 lecture + 8 Practice = 12 hours
Theory objective examination of one hour duration
covering major objectives of all sections in the
following proportions:
SECTION 5: 30%
SECTION 6: 30%
SECTION 7: 20%
SECTION 8: 20%
Practical - Continuous assessment of projects is to
be in the following proportions:
SECTION 5: 30%
SECTION 6: 30%
SECTION 7: 20%
SECTION 8: 20%
Assessment 50%
The student must pass BOTH components.
Suggested Duration Guidelines
Section 5 - Cutting and Gouging Procedures:
8 lecture + 12 Practice = 20 hours
Section 6 - MMAW Techniques:
6 lecture + 18 Practice = 24 hours
Section 7 - GMA Techniques:
3 lecture + 9 Practice = 12 hours
Section 8 - Braze-Welding and Brazing:
4 lecture + 8 Practice = 12 hours
Theory objective examination of one hour duration
covering major objectives of all sections in the
following proportions:
SECTION 5: 30%
SECTION 6: 30%
SECTION 7: 20%
SECTION 8: 20%
Practical - Continuous assessment of projects is to
be in the following proportions:
SECTION 5: 30%
SECTION 6: 30%
SECTION 7: 20%
SECTION 8: 20%
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 0552 | Course In Welding | Accredited course | |
| 4710 | Workshop Technology | Accredited course | |
| 4712 | Workshop Technology (Plant Maintenance) | Accredited course |