Module Outline

Date retreived
23/07/2026 5:52 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use Australian instrumentation drawings, specifications, standards and equipment manuals

Use Australian instrumentation drawings, specifications, standards and equipment manuals

Module
National Code
NAT11297010
State Code
BA373
DTWD Status
Approved
State Implementation and Classification
Approved Date
16/01/2025
Field of Education
030703 - Industrial Engineering
Nominal Hours
4
Description
This unit specifies the use of instrumentation drawings, specifications, standards and equipment manuals applicable to installing, maintaining and fault finding process controls systems relevant to the normal way of doing work in Australia.

This unit is for holders of an Offshore Technical Skills Record (OTSR) or Australian Technical Competencies Statement (ATCS) issued by an RTO and incorporates the minimum context gap to meet Australian standards and regulations.

This unit shall only be undertaken by holders of an OTSR or ATCS for the following qualification or successor of the following qualification:
- UEE30820 Certificate III in Electrotechnology Electrician
Notes
No information
No information
Elements and Performance Criteria
1. Prepare to use instrumentation drawings, specification, standards and equipment manuals
  • 1.1 Work Health and Safety (WHS) procedures for the given work area are obtained from work supervisor according to established procedures
  • 1.2 Instruction in hazards and risk control measures for specific work functions and work areas are identified and obtained
  • 1.3 The nature of the work is obtained from documentation or from work supervisor to establish the scope of work to be undertaken
  • 1.4 Established routines and procedures are followed to obtain instrumentation drawings, specification, standards or equipment manuals required for the work to be undertaken
2. Use instrumentation drawings, specification, standards and equipment manuals
  • 2.1 Established WHS risk control measures and procedures for carrying out the work are followed
  • 2.2 Instrumentation drawings, specification, standards and/or equipment manuals are selected for the work being undertaken
  • 2.3 Instrumentation drawings, specification, standards and equipment manuals are interpreted using knowledge of process controls and instrumentation drawing layouts, conventions and symbols
  • 2.4 Dimensions are extracted from drawings and diagrams for application to work undertaken
  • 2.5 Location of equipment is determined from instrumentation drawings and specification
  • 2.6 Connections between pneumatic, hydraulic and electrical equipment are determined from instrumentation drawings and specifications
  • 2.7 Equipment manuals are reviewed to ascertain their format and where information relevant to the work to be undertaken is located
  • 2.8 Information given in equipment manuals is interpreted in relation to the work to be undertaken
3. Convey instrumentation information and ideas using drawings and diagrams
  • 3.1 Drawing conventions are used in neat freehand drawings to convey instrumentation information and ideas to others involved in the work to be undertaken
  • 3.2 Instrumentation drawing conventions are used to neatly correct freehand original job drawing to show final ‘as-installed’ arrangement
  • 3.3 Corrected drawings are forwarded to work supervisor in accordance with established procedures
Associated Qual/Courses
State Code National Code Title Type
BGZ07 11297NAT Course in Electrician - Minimum Australian Context Gap Accredited course