Module Outline
Date retreived
23/07/2026 1:28 AM AWST
23/07/2026 1:28 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Automotive Diesel B
Automotive Diesel B
Module
National Code
State Code
13007
13007
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/05/1994
Field of Education
030503 - Vehicle Mechanics
Nominal Hours
34
Description
To enable the Automotive or Allied
tradesperson to gain knowledge and
experience in the operation and
overhaul of various injection in-line
pumps and governors.
tradesperson to gain knowledge and
experience in the operation and
overhaul of various injection in-line
pumps and governors.
No information
Evidence Guide
Examination 80% Internal Assessment 20%
A pass in BOTH components is
required.
Theory
Written examination of two hours' duration. Questions are to be based on the
objectives contained in this syllabus. 80%
Assignment
The assignments are to be set to cover or enhance areas of importance that may
not be examined. Where a topic is of significance to the subject material, it
should be covered by an assignment or other suitable enhancement method. If
more than one assignment is set, the marks are to be
averaged. 10%
Practical
Practical projects are to complement the theoretical concepts. The practical
assessment is to be based on averaging all the practical projects that are set,
to reinforce the theory component. 10%
A pass in BOTH components is
required.
Theory
Written examination of two hours' duration. Questions are to be based on the
objectives contained in this syllabus. 80%
Assignment
The assignments are to be set to cover or enhance areas of importance that may
not be examined. Where a topic is of significance to the subject material, it
should be covered by an assignment or other suitable enhancement method. If
more than one assignment is set, the marks are to be
averaged. 10%
Practical
Practical projects are to complement the theoretical concepts. The practical
assessment is to be based on averaging all the practical projects that are set,
to reinforce the theory component. 10%
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 4628 | Automotive Engineering | Accredited course | |
| 4710 | Workshop Technology | Accredited course |