Module Outline
Date retreived
22/07/2026 10:10 AM AWST
22/07/2026 10:10 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Engineering Workshop 1
Engineering Workshop 1
Module
National Code
State Code
42087
42087
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
29/03/1994
Field of Education
039999 - Engineering And Related Technologies, N.e.c.
Nominal Hours
34
Description
To assist the student in a chosen area of employment
or studies in engineering, by improving general
engineering knowledge of:
- the processes more commonly used in the production of
fabricated structures and components.
- the stages which may be gone through in the production of
a fabricated item, from the drawing stage to its final installation.
To give the student as much exposure to actual usage
of machinery and processes in the fabrication
workshop as is practical.
To give the student some knowledge of the
limitations and capabilities of fabrication
production processes and machinery, so that this may
be helpful in the detailed drawing of components.
or studies in engineering, by improving general
engineering knowledge of:
- the processes more commonly used in the production of
fabricated structures and components.
- the stages which may be gone through in the production of
a fabricated item, from the drawing stage to its final installation.
To give the student as much exposure to actual usage
of machinery and processes in the fabrication
workshop as is practical.
To give the student some knowledge of the
limitations and capabilities of fabrication
production processes and machinery, so that this may
be helpful in the detailed drawing of components.
No information
Evidence Guide
Internal Assessment 100%
Project work 70%
Class assessment 30%
Project work should be structured to include the use
of and familiarisation with all fundamental metal
fabrication equipment, preferably involving smaller
more varied projects than a major project. Projects
set will be limited to the equipment capabilities at
the College.
Class assessment should be both oral and written and
address those descriptive topics and basic
principles particularly safety as outlined in the
student objectives.
Project work 70%
Class assessment 30%
Project work should be structured to include the use
of and familiarisation with all fundamental metal
fabrication equipment, preferably involving smaller
more varied projects than a major project. Projects
set will be limited to the equipment capabilities at
the College.
Class assessment should be both oral and written and
address those descriptive topics and basic
principles particularly safety as outlined in the
student objectives.
Elements and Performance Criteria
No information
No information
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| 4911 | Civil Engineering | Accredited course | |
| 6374 | Engineering (Ndt Surface Methods) | Accredited course | |
| 6375 | Engineering (Non-destructive Testing) | Accredited course | |
| 8300 | 0194 | Engineering (Water Resource Management) | Accredited course |
| 7918 | Engineering Civil | Accredited course | |
| 9349 | Engineering Mechanical | Accredited course | |
| 7980 | Engineering Surface Mining | Accredited course | |
| 6373 | Mechanical Engineering | Accredited course | |
| 5026 | Mining Operations | Accredited course |