Pathway Outline

Date retreived
23/07/2026 12:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Agricultural Mechanical

Agricultural Mechanical

Pathway
National Code
—
State Code
WT65
DTWD Status
Replaced
Associated Qualification
Certificate III in Automotive Mechanical Technology
National Code
AUR30405
State Code
W214
TGA Status
Replaced
DTWD Status
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
20/12/2011
Field of Education
0305 - Automotive Engineering And Technology
Approved Date
13/01/2006
Stream of Study
Initial Vocational (3100 - 3600)
Duration
5 Semesters
Current Release Version
2.00
Current Release Date
20/12/2011
Nominal Hours
864
Description
WT65 Automotive Mechanical Technology is a pathway implementation of qualification AUR30405, a training program that leads to the completion of the Certificate III in Automotive - Mechanical.
Packaging Rules
1. Compulsory Units
The following three (3) units of competence are compulsory:
State Code National Code Title Hours Type
W2828 AURC270103A Apply safe working practices 20 Unit of competency
W5084 AURT366108A Carry out diagnostic procedures 30 Unit of competency
W5026 AURT271781A Implement and monitor environmental regulations in the automotive mechanical industry 20 Unit of competency
2. Technical Inventory
Twenty seven (27) units of competence must be achieved. The following six (6) units of competence are compulsory to the Agricultural Mechanical pathway of the AUR30405 Certificate III in Automotive Mechanical Technology.
State Code National Code Title Hours Type
W2854 AURE218708A Carry out repairs to single electrical circuits 20 Unit of competency
W5029 AURT300571A Inspect, service and repair crop planting and seeding equipment 20 Unit of competency
W2885 AURE321971A Inspect, service and repair electronic management, monitoring and tracking systems 30 Unit of competency
W5028 AURT300471A Inspect, service and repair harvesting equipment 20 Unit of competency
W5030 AURT300671A Inspect, service and repair spraying and spreading equipment 20 Unit of competency
W2853 AURE218676A Test, service and charge batteries 20 Unit of competency
3. Technical Inventory
Select a minimum of one (1) of the following units of competence.
State Code National Code Title Hours Type
W5038 AURT303666A Repair diesel fuel systems 30 Unit of competency
W9820 AURT303166B Repair petrol fuel systems 30 Unit of competency
4. Technical Inventory
The remaining twenty (20) units of competence must be selected from the Technical Inventory from the AUR05 Automotive Retail, Service and Repair Training Package. These twenty (20) units of competence are designated as ELECTIVE may be substituted by referring to the qualification structuring rules.
State Code National Code Title Hours Type
W5050 AURT305671A Inspect and repair engine forced induction systems 24 Unit of competency
W2994 AURT210170A Inspect and service braking systems 20 Unit of competency
W2982 AURT202170A Inspect and service cooling systems 20 Unit of competency
W2986 AURT204670A Inspect and service emission control systems 10 Unit of competency
W2990 AURT207170A Inspect and service transmissions (automatic) 20 Unit of competency
W5051 AURT306170A Inspect, service and/or repair clutch assemblies and associated operating system components 30 Unit of competency
W5049 AURT304666A Repair and replace emission control systems 30 Unit of competency
W2981 AURT202166A Repair cooling systems 20 Unit of competency
W9835 AURTL301166A Repair engines and associated engine components (light vehicle) 30 Unit of competency
W9839 AURTL313166A Repair final drive - driveline (light vehicle) 20 Unit of competency
W9838 AURTL312666A Repair final drive assemblies (light vehicle) 30 Unit of competency
W9822 AURT309166A Repair hydraulic systems 40 Unit of competency
W9840 AURTL315166A Repair steering systems (light vehicle) 30 Unit of competency
W9841 AURTL316166A Repair suspension systems (light vehicle) 30 Unit of competency
W9837 AURTL307166A Repair transmissions - automatic (light vehicle) 30 Unit of competency
W9836 AURTL306666A Repair transmissions - manual (light vehicle) 30 Unit of competency
W2985 AURT203670A Service diesel fuel injection systems 16 Unit of competency
W5001 AURT213170A Service final drive (driveline) 16 Unit of competency
W2998 AURT212670A Service final drive assemblies 20 Unit of competency
W2992 AURT209170A Service hydraulic systems 20 Unit of competency
5. Electives
Six (6) units of competence may be selected from the AUR05 Automotive Retail, Service and Repair Training Package or any endorsed Training Package that meet the needs of the enterprise, must be achieved.
State Code National Code Title Hours Type
W5082 AURT365130A Inspect vehicle systems and determine preferred repair action 30 Unit of competency
M1350 MEM5.7AB Manual heating and thermal cutting 18 Unit of competency
W5036 AURT301483A Recondition cylinder heads 30 Unit of competency
W2988 AURT205166A Repair exhaust system components 20 Unit of competency
W5017 AURT222670A Service air conditioning systems 20 Unit of competency
W5042 AURT304270A Service LPG fuel systems 30 Unit of competency
Replaced By
State Code National Code Title Type
J392 AUR30412 Agricultural Mechanical Technology Qualification
Note
This training program was created on 04/08/2008, by METS CSSN as a pathway of AUR30405.
This qualification/pathway is copyright of DEEWR and should be consulted for full description of requirements
Further information on this program may be obtained by contacting METS CSSN on 08 9442 8307.
Entry Requirements
Not Applicable.
(AP02320) AUTOMOTIVE TECHNICIAN (HEAVY AGRICULTURAL EQUIPMENT) Apprenticeship

Part-time is defined as a minimum of 20 hours per week.