Pathway Outline
Date retreived
22/07/2026 10:13 PM AWST
22/07/2026 10:13 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
SAL Kickstart Pre-Apprenticeship - Glass and Glazing
SAL Kickstart Pre-Apprenticeship - Glass and Glazing
Pathway
National Code
—
—
State Code
WB36
WB36
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
11/05/2009
11/05/2009
Field of Education
0403 - Building
0403 - Building
Approved Date
09/12/2003
09/12/2003
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
1.00
1.00
Current Release Date
11/05/2009
11/05/2009
Nominal Hours
600
600
Description
NOTE: No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Glass and Glazing Pathway WB36 and the LMF20402.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Glass and Glazing Pathway WB36 and the LMF20402.
Packaging Rules
1. Core Units
Select all five (5) units from this list.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8281 | MSAPMSUP102A | Communicate in the workplace | 26 | Unit of competency |
| W8247 | MSAPMOHS100A | Follow OHS procedures | 26 | Unit of competency |
| W7008 | MSAPMOPS101A | Make measurements | 20 | Unit of competency |
| D3655 | MSAENV272B | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| W8282 | MSAPMSUP106A | Work in a team | 26 | Unit of competency |
2. Elective Units - Group A
Select (8) units from Groups A, B and C as specified below.
Group A
Select a minimum of five (5) Units from Group A.
Group A
Select a minimum of five (5) Units from Group A.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C9253 | HLTFA301B | Apply first aid | 20 | Unit of competency |
| W8672 | LMFGG2008B | Glaze/reglaze residential windows and doors | 72 | Unit of competency |
| W8669 | LMFGG2005B | Move glass sheets by hand | 8 | Unit of competency |
| W8667 | LMFGG2003B | Operate glass freefall rack and table | 8 | Unit of competency |
| W8671 | LMFGG2007B | Process glass by basic machines | 48 | Unit of competency |
| W8668 | LMFGG2004B | Process thin glass by hand | 64 | Unit of competency |
| W8665 | LMFGG2001B | Use glass and glazing sector hand and power tools | 44 | Unit of competency |
3. Group B
Select a maximum of three (3) units from Groups B and C.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8670 | LMFGG2006B | Move single glass sheets by mechanical means | 16 | Unit of competency |
4. Group C
Up to three (3) relevant units may be chosen from other units not already selected from Groups A and B or units available in this Training Package or other endorsed Training Packages and accredited courses. Those units must be aligned at Certificate II level (maximum 3 units) or Certificate III level (maximum 1 unit).
Units selected from other Training Packages and accredited courses via Group C must be relevant to the qualification outcome and not duplicate units available within this qualification.
If Competitive Manufacturing units are chosen (identified as MSACM in the code), these should only be selected on the basis of work requirements.
Units selected from other Training Packages and accredited courses via Group C must be relevant to the qualification outcome and not duplicate units available within this qualification.
If Competitive Manufacturing units are chosen (identified as MSACM in the code), these should only be selected on the basis of work requirements.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8677 | LMFGG3003B | Move block/bulk glass sheet by mechanical means | 16 | Unit of competency |
5. WORK PLACEMENT MODULES
Complete all modules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 81541 | SAL Work Placement 1 | 50 | Module | |
| 81542 | SAL Work Placement 2 | 50 | Module | |
| 81543 | SAL Work Placement 3 | 50 | Module | |
| 81544 | SAL Work Placement 4 | 50 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB16 | SAL Kickstart Pre-Apprenticeship - Glass and Glazing | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB38 | Pre-Apprenticeship (Glass and Glazing) | Pathway |
Note
1. This training program has been created as a pathway of the Training Package qualification LMF20402 Certificate II in Glass and Glazing on 2 June 2011. Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
2. The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
3. This qualification is the copyright of DEEWR.
4.Further information on this training program may be obtained from the Training Curriculum Services Branch of the Department of Training and Workforce Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
2. The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
3. This qualification is the copyright of DEEWR.
4.Further information on this training program may be obtained from the Training Curriculum Services Branch of the Department of Training and Workforce Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
Entry Requirements
Not applicable.
