Pathway Outline

Date retreived
22/07/2026 9:17 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Pre Apprentice (Mechanical - Engine Reconditioning)

Pre Apprentice (Mechanical - Engine Reconditioning)

Pathway
National Code
—
State Code
ES37
DTWD Status
Replaced
Associated Qualification
Certificate I in Automotive
National Code
AUR10199
State Code
E104
TGA Status
Deleted
DTWD Status
Archived
National Endorsed, State Implementation and Classification
Original TGA Release Date
13/09/1999
Field of Education
0305 - Automotive Engineering And Technology
Approved Date
10/11/2000
Stream of Study
Initial Vocational (3100 - 3600)
Duration
Unspecified
Current Release Version
1.00
Current Release Date
13/09/1999
Nominal Hours
600
Description
Packaging Rules
1.
Complete all Core listed below.
State Code National Code Title Hours Type
E1315 AUR70314A Contribute to workplace communication 18 Unit of competency
W1545 AUR70421B Establish relations with customers 18 Unit of competency
W1346 AUR70125B Follow workplace Occupational Health and Safety requirements 18 Unit of competency
W1544 AUR70278B Use and maintain workplace tools and equipment 18 Unit of competency
2.
TRADE SPECIFIC UNITS: Units selected from trade specific competencies should total between 200-230 hours and be aligned to first year Apprenticeship training.
State Code National Code Title Hours Type
E1310 AUR66108A Carry out diagnostic procedures 18 Unit of competency
E1198 AUR35108A Carry out machining operations 54 Unit of competency
E1000 AUR00108A Carry out maintenance and/or component servicing operations 18 Unit of competency
E1317 AUR70508A Carry out manual handling operations 18 Unit of competency
E1140 AUR26108A Carry out pre-repair operations 18 Unit of competency
W1519 AUR23608B Carry out welding, soldering, thermal cutting and thermal heating procedures 36 Unit of competency
W1523 AUR23708B Carry out welding, thermal heating and cutting procedures 38 Unit of competency
W1522 Carry out welding, thermal heating and cutting procedures (Oxy/Mig welding and thermal cutting) [Part 3 of AUR23708B] 20 Module
W1520 Carry out welding, thermal heating and cutting procedures (Oxy/Mig welding procedures) [Part1 of AUR23708B] 25 Module
W1521 Carry out welding, thermal heating and cutting procedures (Oxy/Tig aluminium welding) [Part 2 of AUR23708B] 25 Module
E1013 AUR01417A Disassemble cylinder heads and evaluate components 36 Unit of competency
E1009 AUR01317A Disassemble engine block and sub-assemblies and evaluate components 72 Unit of competency
E1304 AUR65130A Inspect vehicle systems/components and determine preferred repair action 18 Unit of competency
M0285 MEM7.1AA Operational maintenance of machines/equipment 18 Unit of competency
E1179 AUR31649A Prepare vehicle/component/equipment for customer use 18 Unit of competency
E1306 AUR65349A Prepare written repair quotation 12 Unit of competency
E1005 AUR01170A Service engines and associated engine components 18 Unit of competency
E1197 AUR34972A Set, operate and monitor specialist machines 36 Unit of competency
W1528 AUR25678B Use and maintain measuring equipment 12 Unit of competency
M0410 MEM18.1AA Use hand tools 18 Unit of competency
3.
WORK READINESS: Units selected form work readiness competencies should not exceed 400 hours when added to Core and Trade Specific Units.
State Code National Code Title Hours Type
C3523 BSBCMN203A Communicate in the workplace 30 Unit of competency
C3513 BSBCMN102A Complete daily work activities 20 Unit of competency
C3520 BSBCMN109A Follow environmental work practices 10 Unit of competency
C3518 BSBCMN107A Operate a personal computer 20 Unit of competency
C3522 BSBCMN202A Organise and complete daily work activities 15 Unit of competency
C3515 BSBCMN104A Plan skills development 20 Unit of competency
C3512 BSBCMN101A Prepare for work 30 Unit of competency
4.
Select up to 200 hours of skills practice. Work place placement preferred.
State Code National Code Title Hours Type
Y0077 Supervised Skills Practice 1 (Aae) 40 Module
Y0078 Supervised Skills Practice 2 (Aae) 40 Module
Y0079 Supervised Skills Practice 3 (Aae) 40 Module
Y0080 Supervised Skills Practice 4 (Aae) 40 Module
Y0081 Workplace Placement 1 (Aae) 40 Module
Y0245 Workplace Placement 2 (Aae) 40 Module
Y0246 Workplace Placement 3 (Aae) 40 Module
Y0247 Workplace Placement 4 (Aae) 40 Module
Y0248 Workplace Placement 5 (Aae) 40 Module
No information
Note
No information
No information
No information