Pathway Outline
Date retreived
22/07/2026 9:47 PM AWST
22/07/2026 9:47 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
School Apprenticeship Link - Phase II
School Apprenticeship Link - Phase II
Pathway
National Code
—
—
State Code
WT07
WT07
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
20/12/2011
20/12/2011
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
13/01/2006
13/01/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
2.00
2.00
Current Release Date
20/12/2011
20/12/2011
Nominal Hours
240
240
Description
NOTE: Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
Packaging Rules
1. AUTOMOTIVE ELECTRICAL STREAM
Complete units from ONE stream only.
AUTOMOTIVE ELECTRICAL STREAM - Complete ALL 9 units in this stream.
AUTOMOTIVE ELECTRICAL STREAM - Complete ALL 9 units in this stream.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| W2854 | AURE218708A | Carry out repairs to single electrical circuits | 20 | Unit of competency |
| W2862 | AURE224008A | Carry out soldering of electrical wiring/circuits | 20 | Unit of competency |
| W5026 | AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry | 20 | Unit of competency |
| W2857 | AURE219431A | Install, test and repair electrical security systems/components | 20 | Unit of competency |
| W2856 | AURE219331A | Install, test and repair low voltage wiring/lighting systems | 20 | Unit of competency |
| W2859 | AURE220140A | Manufacture and repair wiring harness/looms | 55 | Unit of competency |
| W2851 | AURE218664A | Remove and replace electrical/electronic units/assemblies | 20 | Unit of competency |
| W2853 | AURE218676A | Test, service and charge batteries | 20 | Unit of competency |
2. AUTOMOTIVE LIGHT VEHICLE STREAM
Complete ALL 10 units in this stream.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| W5007 | AURT217606A | Balance wheels and tyres | 20 | Unit of competency |
| W2854 | AURE218708A | Carry out repairs to single electrical circuits | 20 | Unit of competency |
| W5026 | AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry | 20 | Unit of competency |
| W2994 | AURT210170A | Inspect and service braking systems | 20 | Unit of competency |
| W2982 | AURT202170A | Inspect and service cooling systems | 20 | Unit of competency |
| W2980 | AURT201170A | Inspect and service engines | 20 | Unit of competency |
| W2990 | AURT207170A | Inspect and service transmissions (automatic) | 20 | Unit of competency |
| W2989 | AURT206670A | Inspect and service transmissions (manual) | 20 | Unit of competency |
| W2853 | AURE218676A | Test, service and charge batteries | 20 | Unit of competency |
3. AUTOMOTIVE HEAVY VEHICLE ROAD TRANSPORT STREAM
Complete ALL 10 units in this stream.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| W2854 | AURE218708A | Carry out repairs to single electrical circuits | 20 | Unit of competency |
| W5026 | AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry | 20 | Unit of competency |
| W2982 | AURT202170A | Inspect and service cooling systems | 20 | Unit of competency |
| W2980 | AURT201170A | Inspect and service engines | 20 | Unit of competency |
| W2978 | AURT200368A | Select and use bearings, seals, gaskets, sealants and adhesives | 20 | Unit of competency |
| W2985 | AURT203670A | Service diesel fuel injection systems | 16 | Unit of competency |
| W2998 | AURT212670A | Service final drive assemblies | 20 | Unit of competency |
| W2853 | AURE218676A | Test, service and charge batteries | 20 | Unit of competency |
| W5022 | AURT225667A | Use and maintain measuring equipment | 16 | Unit of competency |
4. OUTDOOR POWER EQUIPMENT STREAM
Complete ALL 11 units in this stream.
5. VEHICLE PAINTING STREAM
Complete ALL 9 units in this stream
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5162 | AURV229603AA | Apply acrylic lacquer refinishing materials | 24 | Unit of competency |
| W5165 | AURV229803AA | Apply fundamental colour matching techniques | 24 | Unit of competency |
| W5161 | AURV229503A | Apply paint removal methods | 20 | Unit of competency |
| W5168 | AURV230449A | Apply paint touch-up techniques | 16 | Unit of competency |
| W5166 | AURV230203A | Apply rust prevention and sound deadening materials | 16 | Unit of competency |
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| W5163 | AURV229608A | Carry out masking procedures | 32 | Unit of competency |
| W5164 | AURV229749A | Prepare spray painting materials and equipment | 24 | Unit of competency |
| W5175 | AURV231649A | Prepare vehicle/component/equipment for customer use | 20 | Unit of competency |
6. PANEL BEATING STREAM
Complete ALL 9 units in this stream.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| W5254 | AURV281108A | Carry out manual metal arc welding procedures | 20 | Unit of competency |
| W5152 | AURV225908A | Carry out panel repairs | 30 | Unit of competency |
| W5153 | AURV226108A | Carry out pre-repair operations (vehicle body) | 24 | Unit of competency |
| W2854 | AURE218708A | Carry out repairs to single electrical circuits | 20 | Unit of competency |
| M1754 | MEM5.4AB | Perform routine oxy acetylene welding | 18 | Unit of competency |
| W5183 | AURV232165A | Remove, replace, fit and test components/accessories | 20 | Unit of competency |
| W2853 | AURE218676A | Test, service and charge batteries | 20 | Unit of competency |
| W5025 | AURT270278A | Use and maintain workplace tools and equipment | 20 | Unit of competency |
7. VEHICLE TRIMMING STREAM
Complete ALL 8 units in this stream.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| W5151 | AURV224508A | Carry out fabrication of components | 20 | Unit of competency |
| W5169 | AURV230608A | Carry out sewing repairs and alterations | 40 | Unit of competency |
| W2862 | AURE224008A | Carry out soldering of electrical wiring/circuits | 20 | Unit of competency |
| W5170 | AURV230708A | Carry out trim repairs and alterations | 40 | Unit of competency |
| W5171 | AURV230864A | Remove and replace vehicle interior trim components | 20 | Unit of competency |
| W5174 | AURV231368A | Select and apply trim/fabric adhesives | 12 | Unit of competency |
| W5025 | AURT270278A | Use and maintain workplace tools and equipment | 20 | Unit of competency |
8. WORK PLACEMENT
Complete this ONE unit.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0325 | Work Placement - SAL Phase II | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WS91 | Automotive - School Apprenticeship Link Phase II | Pathway |
Note
This training program was created on 2 March 2007, by METS CSSN as a pathway of AUR10105.
This qualification/pathway is copyright of DEST and should be consulted for full description of requirements
Further information on this program may be obtained by contacting Colin Crocker of METS CSSN Swan TAFE on (08) 9442 8356.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
This qualification/pathway is copyright of DEST and should be consulted for full description of requirements
Further information on this program may be obtained by contacting Colin Crocker of METS CSSN Swan TAFE on (08) 9442 8356.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
Entry Requirements
Not Applicable
