Pathway Outline
Date retreived
23/07/2026 1:28 AM AWST
23/07/2026 1:28 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Motor Cycles
Motor Cycles
Pathway
National Code
—
—
State Code
WT69
WT69
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
20/12/2011
20/12/2011
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
13/01/2006
13/01/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
5 Semesters
Current Release Version
2.00
2.00
Current Release Date
20/12/2011
20/12/2011
Nominal Hours
864
864
Description
This is a training program that leads to the completion of the Certificate III in Automotive - Mechanical Technology AUR30405. WT69 Motor Cycles is a pathway implementation for apprenticeship delivery.
Packaging Rules
1. Compulsory Units
The following three (3) units of competence are compulsory:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| W5084 | AURT366108A | Carry out diagnostic procedures | 30 | Unit of competency |
| W5026 | AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry | 20 | Unit of competency |
2. Technical Inventory
Twenty seven (27) units of competence must be achieved. The following seventeen (17) units of competence are compulsory to the motor cycle pathway of AUR30405 Certificate III in Automotive Mechanical Technology.
3. Technical Inventory
The remaining ten (10) units of competence must be selected from the Technical Inventory from the AUR05 Automotive Retail, Service and Repair Training Package. These ten (10) units of competence are designated as ELECTIVE may be substituted by referring to the qualification structuring rules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5007 | AURT217606A | Balance wheels and tyres | 20 | Unit of competency |
| W2994 | AURT210170A | Inspect and service braking systems | 20 | Unit of competency |
| W2982 | AURT202170A | Inspect and service cooling systems | 20 | Unit of competency |
| W2980 | AURT201170A | Inspect and service engines | 20 | Unit of competency |
| W5003 | AURT215170A | Inspect and service steering systems | 20 | Unit of competency |
| W5005 | AURT216170A | Inspect and service suspension systems | 20 | Unit of competency |
| W2989 | AURT206670A | Inspect and service transmissions (manual) | 20 | Unit of competency |
| W5001 | AURT213170A | Service final drive (driveline) | 16 | Unit of competency |
| W2998 | AURT212670A | Service final drive assemblies | 20 | Unit of competency |
| W9819 | AURT203170B | Service petrol fuel systems | 20 | Unit of competency |
4. Electives
Six (6) units of competence may be selected from the AUR05 Automotive Retail, Service and Repair Training Package or any endorsed Training Package that meet the needs of the enterprise, must be achieved.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5082 | AURT365130A | Inspect vehicle systems and determine preferred repair action | 30 | Unit of competency |
| W5333 | MEM05007C | Perform manual heating and thermal cutting | 18 | Unit of competency |
| W5036 | AURT301483A | Recondition cylinder heads | 30 | Unit of competency |
| W2988 | AURT205166A | Repair exhaust system components | 20 | Unit of competency |
| W5017 | AURT222670A | Service air conditioning systems | 20 | Unit of competency |
| W5042 | AURT304270A | Service LPG fuel systems | 30 | Unit of competency |
No information
Note
This training program was created on 2/8/2008, by METS CSSN as a pathway of AUR30405.
This qualification/pathway is copyright of DEEWR and should be consulted for full description of requirements
Further information on this program may be obtained by contacting METS CSSN on 08 9442 8307.
This qualification/pathway is copyright of DEEWR and should be consulted for full description of requirements
Further information on this program may be obtained by contacting METS CSSN on 08 9442 8307.
Entry Requirements
Not Applicable.