Qualification Outline
22/07/2026 11:34 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Electronics
Certificate II in Electronics
UEE21910
W949
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 29/07/2011 | Current | Approved |
Description
Scope
This qualification provides competencies to select, assemble, set up and maintain electronic devices following prescribed routines.
Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:- All the Core competency standard units,
- A combination of Elective competency standard units selected from Group A and/or Group B, to achieve a total weighting of 120 points, and
- All the required prerequisite competency standard units
Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
Pathways
| State Code | Title |
|---|---|
| WB29 | Pre-apprenticeship Electronics Service |
1. Core units
Complete all core units:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7803 | UEENEEE001B | Apply OHS practices in the workplace | 18 | Unit of competency |
| W7950 | UEENEEH002B | Carry out basic repairs to electronic apparatus by replacement of components | 36 | Unit of competency |
| W7804 | UEENEEE002B | Dismantle, assemble and fabricate electrotechnology components | 36 | Unit of competency |
| W7835 | UEENEEE034B | Document occupational hazards and risks in electronics | 18 | Unit of competency |
| W7839 | UEENEEE038B | Participate in development and follow a personal competency development plan | 18 | Unit of competency |
| W8180 | UEENEEK042A | Participate in environmentally sustainable work practices | 18 | Unit of competency |
| W7805 | UEENEEE003B | Solve problems in extra-low voltage single path circuits | 36 | Unit of competency |
| W7806 | UEENEEE004B | Solve problems in multiple path d.c. circuits | 36 | Unit of competency |
2. Elective units
Complete Elective units to achieve a total of weighting of 120 points from the following groups:
o Group A Imported and Common Elective units - minimum of 0 and a maximum of 60 points
o Group B Qualification Electives Schedule 2 Units - minimum of 60 and a maximum of 120 points
Please refer to the UEE21910 qualification outline for the list of available options
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W421 | UEE21907 | Certificate II in Electronics | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| A113 | UEE21911 | Certificate II in Electronics | Qualification |
VET Info Notes
1. This qualification is the copyright of Department of Education, Employment and Workplace Relations.
2. Further information on this qualification is contained in the Training Package available from TVET Australia Product Services., Tel: (03) 9832 8188 or
Email: enquiries@tvetaustralia.com.au
3. This qualification was entered on to the STARS by Curriculum Services on 7/4/2011.
Entry Requirements
Not Applicable
Traineeships and Apprenticeships
Part-time is defined as a minimum of 20 hours per week.