Qualification Outline
Date retreived
22/07/2026 1:40 AM AWST
22/07/2026 1:40 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Civil Construction (Plant)
Certificate III in Civil Construction (Plant)
Qualification
National Code:
BCC30198
BCC30198
State Code:
N032
N032
TGA Status:
Deleted
Deleted
DTWD Status:
Archived
Archived
National Endorsed, State Implementation and Classification
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
Original TGA Release Date
08/10/1998
Approved Date
08/08/2000
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
480
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
08/10/1998
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 08/10/1998 | Current | Archived |
Description
Schedule
1. CORE
To obtain this qualification all core competencies plus a minimum of three electives from the 1000 and 2000 series must be achieved. One competency standard from Group A and two from Group B series 3000 electives must also be achieved. Where BCG units are listed, they are taken from the General Construction Training Package.
2. ELECTIVES
Three electives must be achieved from the 1000 and 2000 series.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| N0223 | BCC2001A | Carry out basic site survey | 40 | Unit of competency |
| N0084 | BCG1007A | Erect and dismantle restricted height scaffolding | 16 | Unit of competency |
| N0227 | BCC2006A | Erect/dismantle fencing and gates | 40 | Unit of competency |
| N0225 | BCC2004A | Lay pipes | 40 | Unit of competency |
| N0090 | BCG2007A | Operate elevating work platforms (EWP) | 8 | Unit of competency |
| N0100 | BCG2002A | Oxy/LPG acetylene cutting | 24 | Unit of competency |
| N0103 | BCG2008A | Use explosive power tools (EPT) | 8 | Unit of competency |
3. ELECTIVES
One competency must be achieved from Group A Series 3000 electives. GROUP : A
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| N0231 | BCC3002A | Conduct backhoe/loader operations | 240 | Unit of competency |
| N0232 | BCC3003A | Conduct dozer operations | 240 | Unit of competency |
| N0233 | BCC3004A | Conduct excavator operations | 240 | Unit of competency |
| N0234 | BCC3005A | Conduct front end loader operations | 240 | Unit of competency |
| N0235 | BCC3006A | Conduct grader operations | 320 | Unit of competency |
| N0241 | BCC3014A | Conduct pipelayer operations | 80 | Unit of competency |
| N0242 | BCC3015A | Conduct recycler operations | 80 | Unit of competency |
| N0236 | BCC3007A | Conduct scraper operations | 240 | Unit of competency |
| N0213 | BCC3008A | Conduct skid steer loader operations | 240 | Unit of competency |
4. ELECTIVES
Two competency units must be achieved from Group B Series 3000 electives. GROUP: B
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| N0239 | BCC3011A | Conduct continuous bucket trencher operations | 120 | Unit of competency |
| N0240 | BCC3012A | Conduct dump truck operations | 120 | Unit of competency |
| N0211 | BCC3013A | Conduct forklift operations | 40 | Unit of competency |
| N0245 | BCC3018A | Conduct materials spreader operations | 160 | Unit of competency |
| N0246 | BCC3019A | Conduct profile planer operations | 120 | Unit of competency |
| N0237 | BCC3009A | Conduct roller operations | 120 | Unit of competency |
| N0243 | BCC3016A | Conduct soil and landfill compactor operations | 40 | Unit of competency |
| N0244 | BCC3017A | Conduct telescopic materials handler operations | 80 | Unit of competency |
| N0230 | BCC3001A | Conduct tip truck operations | 80 | Unit of competency |
| N0229 | BCC3000A | Conduct tractor operations | 80 | Unit of competency |
| N0238 | BCC3010A | Conduct water cart operations | 40 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| P021 | 2555 | Certificate III in Civil Construction (Plant Operator) | Accredited course |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W128 | BCC30603 | Certificate III in Civil Construction (Plant Operations) | Qualification |
VET Info Notes
GENERAL NOTE
Special Note: On 18/10/2002, unit N0216 BCC1005A Use Hand and Power Tools (40 hrs) was substituted in the core for unit N0080 BCG1005A Use Hand and Power Tools (40 hrs). Any learner who has completed N0080 as part of this qualification prior to the end of 2002, should not be disadvantaged in using that unit as part of completion of this award.
This training program is a representation of the qualification BCC30198 taken from the General Construction Training Package which should be consulted for full descriptions of requirements.
1. This qualification is the copyright of The Australian National Training Authority. RTOs who wish
to deliver this qualification must be registered by their State accrediting body.
2. Further information on this qualification is contained in the Training Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Training Products and Information Service on 17/11/99.
Special Note: On 18/10/2002, unit N0216 BCC1005A Use Hand and Power Tools (40 hrs) was substituted in the core for unit N0080 BCG1005A Use Hand and Power Tools (40 hrs). Any learner who has completed N0080 as part of this qualification prior to the end of 2002, should not be disadvantaged in using that unit as part of completion of this award.
This training program is a representation of the qualification BCC30198 taken from the General Construction Training Package which should be consulted for full descriptions of requirements.
1. This qualification is the copyright of The Australian National Training Authority. RTOs who wish
to deliver this qualification must be registered by their State accrediting body.
2. Further information on this qualification is contained in the Training Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Training Products and Information Service on 17/11/99.
Entry Requirements
No information
Traineeships and Apprenticeships