Qualification Outline

Date retreived
22/07/2026 5:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Aviation (Remote Pilot)

Certificate III in Aviation (Remote Pilot)

Qualification
National Code:
AVI30419
State Code:
BES9
TGA Status:
Current
DTWD Status:
Approved
National Endorsed, State Implementation and Classification
Field of Education
0315 - Aerospace Engineering And Technology
Original TGA Release Date
13/08/2019
Approved Date
17/12/2019
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
345
Duration
1 Semester
Current Release Number
1.00
Current Release Date
13/08/2019
VET Act Conditions
Releases
Release Version Release Date TGA Status DTWD Status
1.00 13/08/2019 Current Approved
Description

This qualification is relevant to individuals operating remotely piloted aircraft systems (RPAS), in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards.
Remote pilots operating at this level will apply non-technical and technical knowledge and skills to demonstrate autonomy and judgement and will take limited responsibility in known and stable operational contexts within established regulatory parameters.
Licensing, legislative or certification requirements apply to this qualification at the time of publication. This qualification aligns to Remote Pilot Licensing requirements described in Civil Aviation Safety Regulation (CASR) Part 101 — Unmanned aircraft and rockets and Part 101 Manual of Standards.
Civil and military personnel seeking certification as remote pilots should check requirements with CASA.

Schedule
Packaging Rules
A minimum of fourteen (14) units of competency comprising:
- nine (9) core units listed below plus
- two (2) elective units selected from the Group A: General, plus
- at least one (1) elective unit selected from the Group B: Specialist elective, plus
- at least two (2) units selected from the Group C: Operation type elective units listed below

The following unit has a prerequisite unit:
- AVIY0025 Operate powered lift and tilt rotor remote pilot aircraft systems.
1. Core Units

All nine (9) units must be completed.

State Code National Code Title Hours Type
OBB50 AVIZ0005 Apply situational awareness in remote pilot aircraft systems operations 5 Unit of competency
OBC04 AVIY0031 Apply the principles of air law to remote pilot aircraft systems operations 15 Unit of competency
OBB84 AVIY0052 Control remote pilot aircraft systems on the ground 25 Unit of competency
OBC10 AVIY0023 Launch, control and recover a remotely piloted aircraft 25 Unit of competency
OBD24 AVIF0021 Manage human factors in remote pilot aircraft systems operations 20 Unit of competency
OBB82 AVIY0053 Manage remote pilot aircraft systems energy source requirements 25 Unit of competency
OBC93 AVIH0006 Navigate remote pilot aircraft systems 40 Unit of competency
OBC18 AVIW0028 Operate and manage remote pilot aircraft systems 40 Unit of competency
OBC52 AVIW0004 Perform operational inspections on remote operated systems 25 Unit of competency
2. Group A: General Elective Units

Two (2) units must be chosen from Group A.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
OBD22 AVIF0023 Apply aircraft safety procedures 20 Unit of competency
OBD10 AVIF0034 Apply aviation work health and safety procedures 20 Unit of competency
OBC03 AVIY0032 Apply RPAS payload and configuration management principles 45 Unit of competency
OBD31 AVIE0005 Complete a Notice to Airmen (NOTAM) 20 Unit of competency
OBB48 AVIZ0004 Maintain security awareness and vigilance in an aviation workplace 20 Unit of competency
OBD32 AVIE0003 Operate aeronautical radio 25 Unit of competency
OBC95 AVIG0003 Work effectively in the aviation industry 20 Unit of competency
3. Group B: Specialist Elective Units

At least one (1) unit must be chosen from the Group B.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
OBC05 AVIY0030 Operate fixed wing remote pilot aircraft systems 20 Unit of competency
OBC07 AVIY0027 Operate multi-rotor remote pilot aircraft systems 20 Unit of competency
OBC08 AVIY0025 Operate powerlift and tilt rotor remote pilot aircraft systems 20 Unit of competency
OBC11 AVIY0024 Operate remote pilot airship 20 Unit of competency
OBC06 AVIY0029 Operate rotary wing remote pilot aircraft systems 20 Unit of competency
4. Group C: Operation Type Elective Units

At least two (2) units must be chosen from Group C.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
OBC09 AVIY0026 Conduct aerial application operations using remote pilot aircraft systems 35 Unit of competency
OBC37 AVIW0009 Conduct aerial delivery/retrieval operations using remote piloted aircraft systems 35 Unit of competency
OBC38 AVIW0008 Conduct aerial search using remote piloted aircraft 25 Unit of competency
OBC92 AVIH0008 Operate remote pilot aircraft systems in extended visual line of sight (EVLOS) 35 Unit of competency
OBC94 AVIH0007 Operate remote pilot aircraft systems under night visual line of sight (NVLOS) 40 Unit of competency
OBC41 AVIW0007 Perform aerial mapping and modelling using remote piloted aircraft systems 30 Unit of competency
OBC40 AVIW0006 Perform infrastructure inspections using remote operated systems 30 Unit of competency
Replaces
State Code National Code Title Type
AZT2 AVI30316 Certificate III in Aviation (Remote Pilot - Visual Line of Sight) Qualification
No information
Entry Requirements

There are no entry requirements for this qualification.

Traineeships and Apprenticeships
No information