Qualification Outline
Date retreived
22/07/2026 6:57 AM AWST
22/07/2026 6:57 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Civil Construction (Pipelaying)
Certificate III in Civil Construction (Pipelaying)
Qualification
National Code:
BCC30798
BCC30798
State Code:
N038
N038
TGA Status:
Deleted
Deleted
DTWD Status:
Archived
Archived
National Endorsed, State Implementation and Classification
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
Original TGA Release Date
08/10/1998
Approved Date
—
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
246
Duration
Unspecified
Current Release Number
1.00
Current Release Date
08/10/1998
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 08/10/1998 | Current | Archived |
Description
Schedule
1. CORE
To obtain this qualification all core competencies plus a minimum of three electives from the 1000 and 2000 series must be achieved AND three electives from the 3000 series. BCG units are taken from the General Construction Training Package.
2. ELECTIVES
Three electives must be achieved from the 1000 and 2000 series.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| N0223 | BCC2001A | Carry out basic site survey | 40 | Unit of competency |
| N0084 | BCG1007A | Erect and dismantle restricted height scaffolding | 16 | Unit of competency |
| N0225 | BCC2004A | Lay pipes | 40 | Unit of competency |
| N0090 | BCG2007A | Operate elevating work platforms (EWP) | 8 | Unit of competency |
| N0100 | BCG2002A | Oxy/LPG acetylene cutting | 24 | Unit of competency |
| N0226 | BCC2005A | Repair pavements | 36 | Unit of competency |
| N0103 | BCG2008A | Use explosive power tools (EPT) | 8 | Unit of competency |
3. ELECTIVES
Three electives from the 3000 series must be achieved.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| N0260 | BCC3034A | Apply bitumen seal | 32 | Unit of competency |
| N0265 | BCC3039A | Apply road markings | 20 | Unit of competency |
| N0266 | BCC3040A | Install and maintain signage and roadside fixtures | 30 | Unit of competency |
| N0264 | BCC3038A | Lay segmental/unit pavings | 24 | Unit of competency |
| N0257 | BCC3031A | Maintain drainage systems | 16 | Unit of competency |
| N0263 | BCC3037A | Place kerb, channel, median and barrier strips | 36 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W127 | BCC30503 | Certificate III in Civil Construction (Pipe Laying) | Qualification |
VET Info Notes
GENERAL NOTE
This training program is a representation of the qualification BCC30798 taken
from the General Construction Training Package which should be consulted for
full descriptions of requirements. BCC98 is accredited until 22/10/2001
1. This qualification is the copyright of The Australian National Training
Authority. RTOs who wish
to deliver this qualification must be registered by their State
accrediting body.
2. Further information on this qualification is contained in the Training
Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Training Products
and Information Service on 18/11/99.
This training program is a representation of the qualification BCC30798 taken
from the General Construction Training Package which should be consulted for
full descriptions of requirements. BCC98 is accredited until 22/10/2001
1. This qualification is the copyright of The Australian National Training
Authority. RTOs who wish
to deliver this qualification must be registered by their State
accrediting body.
2. Further information on this qualification is contained in the Training
Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Training Products
and Information Service on 18/11/99.
Entry Requirements
No information
Traineeships and Apprenticeships