Qualification Outline
Date retreived
22/07/2026 2:27 AM AWST
22/07/2026 2:27 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Solid Plastering
Certificate III in Solid Plastering
Qualification
National Code:
BCG31003
BCG31003
State Code:
W144
W144
TGA Status:
Deleted
Deleted
DTWD Status:
Replaced
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
11/01/2003
Approved Date
21/01/2005
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
760
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
11/01/2003
VET Act Conditions
This qualification can only be obtained by fulfilling the obligations of an apprentice under a training contract except: (a) a person who is temporarily living in Australia on a student visa issued by the Department of Immigration and Citizenship may obtain the qualification through a registered training provider approved to deliver a course for the qualification; or (b) a person seeking recognition of prior learning under s60I of the VET Act.
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 11/01/2003 | Current | Approved |
Description
Schedule
1.
CORE
All core units must be achieved.
2.
ELECTIVES
Four (4) of the following elective units to be selected in accordance with the Qualification Structuring Rules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W1902 | BCGSP3007B | Apply plaster by projection machine | 32 | Unit of competency |
| W1898 | BCGSP3003B | Apply trowelled texture coat finishes | 80 | Unit of competency |
| W1353 | BCGCO2003B | Carry out concreting to simple forms | 24 | Unit of competency |
| W1901 | BCGSP3006B | Install cast plaster blockwork | 16 | Unit of competency |
| W1900 | BCGSP3005B | Install pre-cast decorative mouldings | 40 | Unit of competency |
| C3748 | BSBSBM301A | Research business opportunities | 30 | Unit of competency |
| W1819 | BCGCM2007B | Use explosive power tools (EPT) | 8 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| N014 | BCG30398 | Certificate III in General Construction (Solid Plastering) | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W586 | CPC31008 | Certificate III in Solid Plastering | Qualification |
VET Info Notes
This training program is a representation of the qualification code BCG31003 taken from the General Construction Training Package BCG03 which should be consulted for full description of requirements. BCG31003 is endorsed until November 2006.
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the CSSN TAFEWA (Swan) on 06/12/2004.
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the CSSN TAFEWA (Swan) on 06/12/2004.
Entry Requirements
No information
Traineeships and Apprenticeships
(AP00520) PLASTERING
Apprenticeship
For elite athletes the minimum hours of employment are 7.5 hours per week, which can be averaged over six month periods.