Qualification Outline

Date retreived
22/07/2026 1:59 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Process Manufacturing (Plastics-Thermoforming)

Certificate II in Process Manufacturing (Plastics-Thermoforming)

Qualification
National Code:
PMB21398
State Code:
C142
TGA Status:
Deleted
DTWD Status:
Archived
National Endorsed, State Implementation and Classification
Field of Education
0303 - Process And Resources Engineering
Original TGA Release Date
22/10/1998
Approved Date
04/07/2001
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
182
Duration
Unspecified
Current Release Number
1.00
Current Release Date
22/10/1998
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 22/10/1998 Current Archived
Description
Schedule
1. CORE
State Code National Code Title Hours Type
C0762 PMBOHS04A Apply emergency/incident procedures 26 Unit of competency
C0803 PMBPROD35A Use materials and process knowledge to complete work operations 26 Unit of competency
2. ELECTIVES

Learners to select 5 units - 3 units from the list in the training package under PMB21398 and up to 2 units may be selected from other Training Package(s) from a Certificate II qualification.

State Code National Code Title Hours Type
C0837 PMBPREP05A Assemble and organise materials 26 Unit of competency
C0806 PMBPROD38A Chemically cut materials 13 Unit of competency
C0805 PMBPROD37A Chemically join materials 52 Unit of competency
C0813 PMBPROD45A Cut, shape and fabricate materials 52 Unit of competency
C0736 PMBFINISH01A Finish products for customer use 26 Unit of competency
C0737 PMBFINISH02A Fit attachments to products 26 Unit of competency
C0817 PMBPROD49A Hand application of surface coatings 26 Unit of competency
C0740 PMBFINISH05A Hand decorate products 52 Unit of competency
C0756 PMBMAINT02A Maintain equipment 26 Unit of competency
C0808 PMBPROD40A Mechanically cut materials 13 Unit of competency
C0807 PMBPROD39A Mechanically join materials 13 Unit of competency
C0804 PMBPROD36A Operate hand held air/power equipment for production processes 13 Unit of competency
C0734 PMBCUST01A Provide service to customers 26 Unit of competency
C0832 PMBORG05A Receive goods 26 Unit of competency
C0738 PMBFINISH03A Repair product imperfections 26 Unit of competency
C0732 PMBCOMP01A Use computers in the workplace 26 Unit of competency
C0752 PMBHANDLE07A Use cranes and gantries to shift loads 52 Unit of competency
Replaced By
State Code National Code Title Type
C583 PMB20101 Certificate II in Plastics Qualification
VET Info Notes
GENERAL NOTES

This training program is a representation of the qualification PMB21398 taken
from the Plastics, Rubber and
Cablemaking Training Package PMB98 which should be consulted for full
descriptions of requirements.
PMB98 is endorsed until 01/10/200.

1. This qualification is the copyright of The Australian National Training
Authority.

2. Further information on this qualification is contained in the Training
Package available from
Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the CMS by Central TAFE on 04/07/01.

4. The total course hours will vary depending on electives selected.
Entry Requirements
No information
Traineeships and Apprenticeships
No information