Qualification Outline
22/07/2026 3:31 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Civil Construction (Road Construction & Maintenance)
Certificate III in Civil Construction (Road Construction & Maintenance)
BCC30298
N033
Deleted
Archived
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 08/10/1998 | Current | Archived |
Description
Schedule
1. CORE
To obtain this qualification all core competencies plus a minimum of three electives from the 1000 and 2000 series must be achieved AND three from the series 3000 electives must also be achieved. Where BCG units are used, they are taken from the General Construction Training Package.
2. ELECTIVES
Three electives must be achieved from the 1000 and 2000 series must be achieved.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| N0223 | BCC2001A | Carry out basic site survey | 40 | Unit of competency |
| N0084 | BCG1007A | Erect and dismantle restricted height scaffolding | 16 | Unit of competency |
| N0227 | BCC2006A | Erect/dismantle fencing and gates | 40 | Unit of competency |
| N0090 | BCG2007A | Operate elevating work platforms (EWP) | 8 | Unit of competency |
| N0100 | BCG2002A | Oxy/LPG acetylene cutting | 24 | Unit of competency |
| N0103 | BCG2008A | Use explosive power tools (EPT) | 8 | Unit of competency |
3. ELECTIVES
Three electives must be achieved from Series 3000 electives.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| N0260 | BCC3034A | Apply bitumen seal | 32 | Unit of competency |
| N0265 | BCC3039A | Apply road markings | 20 | Unit of competency |
| N0266 | BCC3040A | Install and maintain signage and roadside fixtures | 30 | Unit of competency |
| N0261 | BCC3035A | Lay asphalt | 40 | Unit of competency |
| N0264 | BCC3038A | Lay segmental/unit pavings | 24 | Unit of competency |
| N0257 | BCC3031A | Maintain drainage systems | 16 | Unit of competency |
| N0267 | BCC3041A | Maintain sealed roads | 32 | Unit of competency |
| N0263 | BCC3037A | Place kerb, channel, median and barrier strips | 36 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W129 | BCC30703 | Certificate III in Civil Construction (Road Construction and Maintenance) | Qualification |
VET Info Notes
Special Note: On 18/10/2002, unit N0216 BCC1005A Use Hand and Power Tools (40 hrs) was substituted in the core for unit N0080 BCG1005A Use Hand and Power Tools (40 hrs). Any learner who has completed N0080 as part of this qualification prior to the end of 2002, should not be disadvantaged in using that unit as part of completion of this award.
This training program is a representation of the qualification BCC30298 taken from the General Construction Training Package which should be consulted for full descriptions of requirements.
1. This qualification is the copyright of The Australian National Training Authority. RTOs who wish
to deliver this qualification must be registered by their State accrediting body.
2. Further information on this qualification is contained in the Training Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Training Products and Information Service on 17/11/99.
Entry Requirements
No information
Traineeships and Apprenticeships
No new enrolments - teach out only