Qualification Outline
22/07/2026 7:09 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Electrotechnology Computer Systems
Certificate III in Electrotechnology Computer Systems
UTE30599
M029
Deleted
Archived
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 21/07/1999 | Current | Archived |
Description
Schedule
1. CORE
Reference should be made to the non endorsed electrotechnology competencies mapping against modules. The outcomes of the modules will assist with meeting the requirements of the competencies. Holistic delivery and management of the funded hours must ensure the 900 hours for the total program is not exceeded. The hours allocated against each competency in this program are related to assessment and reporting. The underpinning knowledge and skills indicated in the groups are to assist with the pathway to competency and should be completed prior to the assessment and reporting. Some competencies have no formal off-the-job requirements.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0741 | UTENES501AA | Diagnose and rectify faults in apparatus & circuits (Computer systems) | 5 | Unit of competency |
| M0550 | UTENES106AA | Install electrical/electronic apparatus (Computer systems) | 5 | Unit of competency |
| M0591 | UTENES206AA | Maintain & repair apparatus & circuits (Computer systems) | 5 | Unit of competency |
| M0508 | UTENES009A | Participate in the training of others | 7 | Unit of competency |
| M0683 | UTENES402AA | Test apparatus & circuits (Computer systems) | 5 | Unit of competency |
| M0651 | UTENES301AA | Undertake commissioning of apparatus & circuits (Computer systems) | 5 | Unit of competency |
2. ELECTIVE
1.learner undertaking UTENES009A will be required to complete the underpinning knowldege and skills listed below. These must be completed prior to the final assessment in UTENES009A.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 90131 | NUE110 | Introduction to Application Software | 36 | Module |
3. ELECTIVE
1. Learners undertaking UTENES106AA will be required to complete the underpinning knowledge and skills listed below. These must be completed prior to the final assessment in UTENES106AA.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 90070 | NUE52 | Applied Electricity 1 | 36 | Module |
| 43633 | NE179 | Digital Electronics 1 | 36 | Module |
| 87549 | NE172 | Electrical Wiring and Equipment 1 | 18 | Module |
| 90165 | NUE154 | Electronic Fault Finding | 18 | Module |
| 43625 | NE184 | Electronic Hand Soldering Technology | 36 | Module |
| 90131 | NUE110 | Introduction to Application Software | 36 | Module |
| 90134 | NUE113 | Linear and Switchmode Power Supply | 36 | Module |
| 87530 | NBB02 | Occupational Health and Safety | 18 | Module |
| 87529 | NE175 | Workshop Practices | 36 | Module |
4. ELECTIVE
1. Learners undertaking UTENES206AA, UTENES301AA, UTENES402AA and UTENES501AA will be required to complete the underpinning knowledge and skills listed in group 4. These must be completed prior to the final assessment in UTENES206AA, UTENES301AA, UTENES402AA and UTENES501AA.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 90070 | NUE52 | Applied Electricity 1 | 36 | Module |
| 90071 | NUE54 | Applied Electricity 2 | 36 | Module |
| 90073 | NUE56 | Applied Electricity 4 | 36 | Module |
| 87566 | NE110 | Data Communication Fundamentals | 36 | Module |
| 43630 | NE178 | Dc Power Supplies | 36 | Module |
| 43633 | NE179 | Digital Electronics 1 | 36 | Module |
| 43621 | NE180 | Digital Electronics 2 | 36 | Module |
| 87549 | NE172 | Electrical Wiring and Equipment 1 | 18 | Module |
| 90165 | NUE154 | Electronic Fault Finding | 18 | Module |
| 90131 | NUE110 | Introduction to Application Software | 36 | Module |
| 87314 | NE115 | Introduction to Local Area Networks | 36 | Module |
| 90134 | NUE113 | Linear and Switchmode Power Supply | 36 | Module |
| 86960 | NE018 | Microprocessor Fundamentals | 54 | Module |
| 90154 | NUE119 | Network Operating Systems | 36 | Module |
| 87530 | NBB02 | Occupational Health and Safety | 18 | Module |
| 69001 | ITH203 | Using A Command Line Interface | 20 | Module |
| 31282 | ITH202 | Using A Graphical User Interface | 20 | Module |
| 87529 | NE175 | Workshop Practices | 36 | Module |
5. ELECTIVES
Select one of the elective units. The elective units do not have any off-the-job component and will be assessed as on-the -job.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0501 | UTENES002A | Attend to breakdown | 20 | Unit of competency |
| M0504 | UTENES005A | Coordinate materials | 20 | Unit of competency |
| M0507 | UTENES008A | Provide technical leadership in the workplace | 20 | Unit of competency |
| M0506 | UTENES007A | Supply projects | 20 | Unit of competency |
6. ELECTIVES
SPECIALISATION Optional Units 1. A further selection can be made by choosing one (1) further unit per specialisation if required. Note: The specialisation selected to maximum of 177 hours. 2. Learners not undertaking one of the specialisation's will be required to complete the underpinning knowledge and skills listed in group 4 .
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0612 | UTENES209QA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Control Devices) | 5 | Unit of competency |
| M0611 | UTENES209RA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Electrical Heaters) | 5 | Unit of competency |
| M0610 | UTENES209SA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Motors) | 5 | Unit of competency |
| M0614 | UTENES209NA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Pre-Assembled Neon Signs) | 5 | Unit of competency |
| M0613 | UTENES209PA | Attach flexible cords & plugs to electrical equipment 250 volt supply (Single Enclosed C/Device) | 5 | Unit of competency |
7. ELECTIVES
Business Machines. Select a maximum of 172 hours.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 33067 | NTC014 | Basic Telephony | 10 | Module |
| 90150 | NUE116 | Business Machine Accessories | 18 | Module |
| 90148 | NUE114 | Business Machines Transducers | 18 | Module |
| 90345 | NUE117 | Colour Photocopying Principles | 36 | Module |
| 87181 | NE112 | Computer Peripherals | 36 | Module |
| 90234 | NUE502 | Computer Systems Safety | 18 | Module |
| 90152 | NUE118 | Facsimile Machines | 36 | Module |
| 87314 | NE115 | Introduction to Local Area Networks | 36 | Module |
| 87311 | NE111 | Personal Computer Servicing (1) | 36 | Module |
| 90344 | NUE115 | Photocopier Operating Principles | 72 | Module |
| 86999 | NE117 | Receivers | 36 | Module |
| 33069 | NTC017 | Switching Systems Overview | 10 | Module |
| 90338 | NUE192 | Telecommunications Systems Overview | 18 | Module |
8. ELECTIVE
Control. Select a maximum of 172 hours.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 43628 | NE182 | Amplifiers 1 | 36 | Module |
| 43629 | NE183 | Amplifiers 2 | 36 | Module |
| 90234 | NUE502 | Computer Systems Safety | 18 | Module |
| 87271 | NI201 | Concepts of Measurement | 18 | Module |
| 43578 | EA906 | Control Interfacing | 36 | Module |
| 43580 | EA908 | Control Programming Style | 36 | Module |
| 90254 | NUE703 | Digital Sub-systems | 18 | Module |
| 90169 | NUE158 | Intro to Resonance, Filters and Oscillators | 36 | Module |
| 86794 | NE130 | Programmable Controllers - Basic | 18 | Module |
| 87554 | NE177 | Programmable Controllers 1 | 36 | Module |
9. ELECTIVES
Data Capture. select up to a maximum of 172 hours.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 43628 | NE182 | Amplifiers 1 | 36 | Module |
| 43629 | NE183 | Amplifiers 2 | 36 | Module |
| 90346 | NUE161 | Auto Data Capture Systems | 36 | Module |
| 86979 | NE039 | Communications Fundamentals | 36 | Module |
| 90234 | NUE502 | Computer Systems Safety | 18 | Module |
| 43578 | EA906 | Control Interfacing | 36 | Module |
| 90254 | NUE703 | Digital Sub-systems | 18 | Module |
| 90169 | NUE158 | Intro to Resonance, Filters and Oscillators | 36 | Module |
| 86794 | NE130 | Programmable Controllers - Basic | 18 | Module |
| 87674 | NI213 | Telemetering (Telemetry) | 18 | Module |
10. ELECTIVES
Networks. select up to a maximum of 172 hours.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 33067 | NTC014 | Basic Telephony | 10 | Module |
| 90130 | NUE108 | Computer Monitors | 36 | Module |
| 87181 | NE112 | Computer Peripherals | 36 | Module |
| 90234 | NUE502 | Computer Systems Safety | 18 | Module |
| 43580 | EA908 | Control Programming Style | 36 | Module |
| 87309 | NE103 | Microprocessor Applications (1) | 36 | Module |
| 87392 | NE097 | Multimedia Computer Systems | 36 | Module |
| 87311 | NE111 | Personal Computer Servicing (1) | 36 | Module |
| 87337 | NE131 | Personal Computer Servicing (2) | 36 | Module |
| 33069 | NTC017 | Switching Systems Overview | 10 | Module |
| 90338 | NUE192 | Telecommunications Systems Overview | 18 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 3114 | 7891 | Certificate III in Electronic Servicing | Accredited course |
| 5400 | 7823 | Certificate II in Small Computer Systems | Accredited course |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W425 | UEE30207 | Certificate III in Computer Systems Equipment | Qualification |
VET Info Notes
from the Electrotechnology Training Package UTE99 which should be consulted for
full descriptions of requirements. UTE99 is accredited until 30/06/2002.
1. This qualification is the copyright of The Australian National Training
Authority.
2. Further information on this qualification is contained in the Training
Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Midland College of
TAFE. This qualification was amended by SWAN TAFE on the 8/01/03. UTENES 106AA was added to the core and additional underpinnning knowledge to groups 04, 07, 08, 10 and NE119 removed from group 04.
Entry Requirements
No information
Traineeships and Apprenticeships