Qualification Outline
23/07/2026 2:00 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Diploma of Aeroskills (Non-Destructive Testing)
Diploma of Aeroskills (Non-Destructive Testing)
MEA50515
AVN8
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 12/02/2015 | Current | Approved |
Description
This qualification applies to individuals who perform non-destructive testing (NDT) on aircraft and aircraft components in accordance with AS 3669-2006 Non-destructive testing - Qualification and approval of personnel - Aerospace at Level 2 and in compliance with the regulatory requirements of the Civil Aviation Safety Authority (CASA) and of the Australian Defence Force (ADF).
The requirement for the awarding of MEA50515 Diploma of Aeroskills (Non-Destructive Testing) is demonstrated competency in listed units of competency under the conditions set out below. It consists of core units plus applicable units from electives Group A.
Core units are as follows:
preliminary common and technical stream units for individuals who do not have a Certificate IV in Aeroskills
mandatory units consisting of:
common and technical stream units that relate to the aviation maintenance environment
technical stream and imported units relating to the NDT work environment
imported units that specifically cover the competencies required to perform each relevant NDT technique to the standard specified in AS 3669-2006 Non-destructive testing - Qualification and approval of personnel - Aerospacefor Level 2 personnel.
Elective Group A units consist of:
common units specific to either CASA or ADF regulatory requirements
technical stream and imported units that are applicable to various areas of employment in the NDT field.
The core and elective units provide for two training pathways to the qualification as follows:
one that provides for Certificate IV qualified aviation tradespersons to progress to the Diploma level NDT qualification (the career path for uniformed ADF personnel and possibly some civilian personnel)
another that provides for progression to Diploma level NDT qualification from direct entry (the career path that may be followed by NDT personnel used by the maintenance organisations other than those operating under the ADF regulatory system).
The qualification also provides credits towards the MEA50415 Diploma of Aviation Maintenance Management (Mechanical), the MEA60215 Advanced Diploma of Aviation Maintenance Management (Mechanical) and the MEA60315 Advanced Diploma of Aviation Non-Destructive Testing.
Schedule
Packaging Rules
To be awarded the MEA50515 Diploma of Aeroskills (Non-Destructive Testing) competency must be demonstrated in twenty-five (25) to thirty-four (34) units, chosen as described below.Core units of competency
- Individuals who do not have a Certificate IV in Aeroskills must complete the following nine (9) core preliminary units.
- Individuals who have a Certificate IV in Aeroskills and those who have completed the preliminary units must complete the following twenty-two (22) other core units.
Notes:
1. MEA109 is equivalent to the following three units combined MEM12023A, MEM18001C and MEM18002B
2. MEA260 and MEA261 are together equivalent to MEM12004B
3. MEA103 is equivalent to MEM14005A
Elective units of competency
Group A
- Complete three (3) units chosen in accordance with the unit selection guidelines in column 4 (please refer to the Training Package for the details of column 4)
1. Preliminary Core Units
All nine (9) preliminary units must be completed if individuals do NOT have a Certificate IV in Aeroskills.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AUD71 | MEA341 | Apply basic aircraft design characteristics | 120 | Unit of competency |
| AUE99 | MEA342 | Apply basic aircraft power plant design characteristics | 120 | Unit of competency |
| AUE27 | MEA105 | Apply quality standards applicable to aviation maintenance | 40 | Unit of competency |
| AUF83 | MEA108 | Complete aviation maintenance industry documentation | 40 | Unit of competency |
| AUF71 | MEA107 | Interpret and use aviation maintenance industry manuals and specifications | 40 | Unit of competency |
| AUF25 | MEA101 | Interpret work health and safety practices in aviation maintenance | 40 | Unit of competency |
| AUE12 | MEA340 | Lay out and set up aircraft systems | 120 | Unit of competency |
| AUF28 | MEA109 | Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance | 40 | Unit of competency |
| AUF50 | MEA103 | Plan and organise aviation maintenance work activities | 40 | Unit of competency |
2. Core Units
All twenty-two (22) units to be completed.
Individula who have a Certificate IV in Aeroskills and those who have completed the preliminary units must completed the following units.
3. Group A Elective Units
Three (3) units to be chosen from Group A in accordance with the unit selection guidelines in column 4 (please refer to the Training Package for the details of column 4).
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5551 | MEM17002B | Conduct workplace assessment | 18 | Unit of competency |
| W5520 | MEM15010B | Perform laboratory procedures | 72 | Unit of competency |
| AUD82 | MEA112 | Plan and implement civil aircraft maintenance activities | 80 | Unit of competency |
| WA870 | TAEDEL301A | Provide work skill instruction | 40 | Unit of competency |
| AUE02 | MEA140 | Supervise aviation maintenance teams and perform maintenance quality inspections | 40 | Unit of competency |
| AUE00 | MEA113 | Supervise civil aircraft maintenance activities and manage human resources in the workplace | 80 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D754 | MEA50511 | Diploma of Aeroskills (Non-Destructive Testing) | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BDX1 | MEA50518 | Diploma of Aeroskills (Non-Destructive Testing) | Qualification |
No information
Entry Requirements
Not applicable
Traineeships and Apprenticeships