Qualification Outline
Date retreived
22/07/2026 5:23 AM AWST
22/07/2026 5:23 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Printing and Graphic Arts (Small Offset)
Certificate II in Printing and Graphic Arts (Small Offset)
Qualification
National Code:
ICP21199
ICP21199
State Code:
C252
C252
TGA Status:
Deleted
Deleted
DTWD Status:
Archived
Archived
National Endorsed, State Implementation and Classification
Field of Education
0301 - Manufacturing Engineering And Technology
Original TGA Release Date
18/01/1999
Approved Date
18/01/1999
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
400
Duration
Unspecified
Current Release Number
1.00
Current Release Date
18/01/1999
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 18/01/1999 | Current | Archived |
Description
Schedule
1. CORE
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C3404 | ICPSU62AA | Communicate in the workplace | 30 | Unit of competency |
| C3262 | ICPKN12A | Demonstrate knowledge and requirements of printing machining | 1 | Unit of competency |
| C3402 | ICPSU61AA | Follow OH&S practices and identify environmental hazards | 30 | Unit of competency |
| C3383 | ICPSU16AA | Inspect quality against required standards | 30 | Unit of competency |
| C3378 | ICPSU08BA | Operate and monitor machines (basic) | 30 | Unit of competency |
| C3390 | ICPSU24BA | Perform basic machine maintenance | 30 | Unit of competency |
| C3375 | ICPSU03BA | Prepare and maintain the work area | 30 | Unit of competency |
| C3380 | ICPSU11BA | Prepare ink and additives | 30 | Unit of competency |
| C3377 | ICPSU07BA | Prepare machine for operation (basic) | 30 | Unit of competency |
| C3374 | ICPSU02BA | Prepare, load and unload sheets / sections on and off machine | 20 | Unit of competency |
| C3389 | ICPSU23BA | Treat and dispose of liquid waste | 30 | Unit of competency |
| C3409 | ICPSU81BA | Use computer systems | 30 | Unit of competency |
2. ELECTIVES
SELECTING ANY TWO UNITS OF COMPETENCE FROM EITHER COMBINATION OF THE FOLLOWING ELECTIVES
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C3334 | ICPPR32CA | Produce basic lithographic printed product | 50 | Unit of competency |
| C3352 | ICPPR82BA | Produce electronic / digital printed product (basic) | 30 | Unit of competency |
| C3332 | ICPPR31BA | Set up for basic lithographic printing | 30 | Unit of competency |
| C3350 | ICPPR81BA | Set up for electronic / digital printing (basic) | 30 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 3404 | 2458 | Printing (Small Offset) | Accredited course |
| 3432 | 13321SA | Certificate II in Vocational Education - Printing Trades | Accredited course |
VET Info Notes
GENERAL NOTES
1. This qualification is a representation of the qualification ICP21199
taken from the Printing and
Graphic Arts Training Package which should be consulted for full
descriptions of its requirements.
ICP99 is endorsed until the 28/02/2002.
2. This package may vary in hours from 380 hours to 400 hours depending
on the chosen electives.
3. This qualification is the copyright of The Australian National
Training Authority. RTO's who
wish to deliver this qualification must be registered by their State
accrediting body.
4. Further information on this qualification is contained in the
Training Package available from
Australian Training Products Limited, Tel: (03) 9639 9836
5. This course was entered on to the CMS by Central TAFE on 07/12/2000.
1. This qualification is a representation of the qualification ICP21199
taken from the Printing and
Graphic Arts Training Package which should be consulted for full
descriptions of its requirements.
ICP99 is endorsed until the 28/02/2002.
2. This package may vary in hours from 380 hours to 400 hours depending
on the chosen electives.
3. This qualification is the copyright of The Australian National
Training Authority. RTO's who
wish to deliver this qualification must be registered by their State
accrediting body.
4. Further information on this qualification is contained in the
Training Package available from
Australian Training Products Limited, Tel: (03) 9639 9836
5. This course was entered on to the CMS by Central TAFE on 07/12/2000.
Entry Requirements
No information
Traineeships and Apprenticeships