Unit of competency Outline

Date retreived
23/07/2026 6:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate and install residential leadlight and stained glass windows and doors

Fabricate and install residential leadlight and stained glass windows and doors

Unit of competency
National Code
MSFSL3003
State Code
WI646
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
040323 - Glazing
Original Release Date
20/06/2014
Nominal Hours
50
Description
This unit of competency covers planning, fabricating and installing residential leadlight and stained glass windows and doors.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking glass and glazing work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1 Identify work requirements
  • 1.1 Applicable work health and safety (WHS), legislative and organisational requirements relevant to leadlight and stained glass operations are verified and complied with
  • 1.2 The process for fabricating and installing leadlight and stained glass windows and doors is identified
  • 1.3 Types and quantities of materials required are calculated from plans or work instructions or by measuring the fixture opening
  • 1.4 Cutting lists are prepared from plans, work instructions or measurements of opening to suit the window or door to be installed
  • 1.5 Fittings, fixings and joining devices or materials are selected
  • 1.6 Tools and equipment appropriate to the fixing method are identified
2 Prepare for work
  • 2.1 Work sequence is determined in a logical order to suit the job
  • 2.2 Tools, equipment and materials are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
  • 2.3 Components of the leadlight and stained glass window or door are checked against specifications or job order
3 Fabricate and install leadlight and stained glass windows and doors
  • 3.1 Materials are cut to cutting list requirements
  • 3.2 Components of leadlight and stained glass window or door are assembled
  • 3.3 Fittings are installed to window or door in accordance with workplace procedures or industry practice
  • 3.4 Window or door is installed
4 Finalise the installation
  • 4.1 Installed window or door is inspected for quality of work and repaired, re-fabricated or reinstalled, as required
  • 4.2 Waste and scrap material are removed for disposal or recycling, as required
  • 4.3 Work area is cleaned and rubbish disposed of, as appropriate
  • 4.4 Tools, equipment and unused materials are cleaned and removed and stored appropriately
  • 4.5 Workplace records are maintained according to workplace procedures
No information
No information
No information
State Code National Code Title Type
J732 MSF30413 Certificate III in Glass and Glazing Qualification
J751 MSF50113 Diploma of Stained Glass and Leadlighting Qualification