Unit of competency Outline
Date retreived
23/07/2026 5:53 PM AWST
23/07/2026 5:53 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Identify wastes and hazards in the waste management industry
Identify wastes and hazards in the waste management industry
Unit of competency
National Code
TLIU3015A
TLIU3015A
State Code
WI843
WI843
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
21/03/2014
Field of Education
039901 - Environmental Engineering
Original Release Date
21/03/2014
Nominal Hours
20
Description
This unit involves the skills and knowledge required to identify a range of wastes and potential hazards that may be present in the work environment, to assess risks associated with identified hazards and to mitigate those risks effectively.Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1 Identify waste
- 1.1 Waste characteristics are identified
- 1.2 Types of wastes are differentiated by waste stream or waste categories in accordance with state/territory regulatory requirements
- 1.3 Hazardous and dangerous waste and non-conforming waste are detailed
- 1.4 Contaminants present in waste are noted
- 1.5 Further information on waste is obtained by questioning appropriate personnel to ensure correct identification in accordance with state/territory regulatory requirements
2 Identify hazards and assess risk
- 2.1 Potential hazards present in work environment identified and recorded in accordance with workplace policies and state/territory regulatory requirements
- 2.2 Based on hazards identified, risks are assessed and reported in accordance with workplace policies and state/territory regulatory requirements
- 2.3 Supervisor and team members are accurately informed of job requirements, identified hazards and risk assessment
- 2.4 Safe work practices that prevent risk behaviour are outlined to supervisor in accordance with workplace policies and procedures
3 Implement and evaluate risk controls
- 3.1 Appropriate risk controls are discussed with supervisor and team members
- 3.2 Appropriate risk controls are implemented in accordance with workplace policies and procedures
- 3.3 Risk controls implemented are evaluated for effectiveness and modified as required in accordance with workplace policies and procedures
4 Implement emergency procedures
- 4.1 Emergency procedures are identified and confirmed with supervisor
- 4.2 Emergency procedures are practiced with team members and implemented as required in accordance with workplace policies and procedures, and state/territory regulatory requirements
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Waste characteristics may include:
density
level of contamination
quality
quantity
shape
size
volume
weight
Waste stream may include:
construction and demolition
dangerous goods
green waste
hazardous substances
municipal waste
Waste categories may include:
asbestos
clinical/cytoxic waste - medical waste, dressings, sharps, pharmaceutical products, anatomical waste
commercial and industrial waste
construction and demolition waste - broken bricks, concrete, plasterboard, glass, metals, soils, tiles, timbers
general household waste/hard rubbish
hazardous waste - acid, caustic, greasy trap waste, oily rags, filters, coolants, oily sludges, septic waste, solvents, trade waste (i.e. paints), used cooking oils, batteries
manufactured products - clothing and footwear
organic and green waste - fruit, vegetables, fish, all green waste
processed food and beverage waste - food, beverages, tobacco and liquor, used cooking oil
quarantine waste - airport and seaport amnesty bin waste, wash water waste from international vessels and from cleaning of heavy vehicles
recyclable materials - cardboard, plastic wrap, polystyrene, newspapers, magazines, phone books, boxes, cartons and packaging
sanitary waste
Hazardous and dangerous waste may include:
all waste depending on the condition, environment and extent of personal exposure
asbestos
biological products
blood products
chemicals
electrical wiring
glass
hospital waste
leaking containers
medical waste
needles and syringes
oil and petrol
Non conforming waste may include:
contamination
hazardous or dangerous waste
inferior quality and unacceptable waste streams
Contaminants may include:
infestation
mixing waste types
rot or mould
sunlight
waterlogging
Other potential hazards and risks are those that may lead to:
damage to plant, vehicle or property
harm to the environment, including soil and streams
illness or injury to employees, contractors or the general public
injuries resulting from manual handling and repetitive work
Hazards and risks may include:
broken glass
burns
clinical/cytotoxic waste (e.g. dressings and sharps)
compaction equipment
contamination
corrosion
dust
fire
fumes
narrow driveways
other vehicles and equipment
overhanging signs
projectiles
spark-producing equipment
weather
Waste characteristics may include:
density
level of contamination
quality
quantity
shape
size
volume
weight
Waste stream may include:
construction and demolition
dangerous goods
green waste
hazardous substances
municipal waste
Waste categories may include:
asbestos
clinical/cytoxic waste - medical waste, dressings, sharps, pharmaceutical products, anatomical waste
commercial and industrial waste
construction and demolition waste - broken bricks, concrete, plasterboard, glass, metals, soils, tiles, timbers
general household waste/hard rubbish
hazardous waste - acid, caustic, greasy trap waste, oily rags, filters, coolants, oily sludges, septic waste, solvents, trade waste (i.e. paints), used cooking oils, batteries
manufactured products - clothing and footwear
organic and green waste - fruit, vegetables, fish, all green waste
processed food and beverage waste - food, beverages, tobacco and liquor, used cooking oil
quarantine waste - airport and seaport amnesty bin waste, wash water waste from international vessels and from cleaning of heavy vehicles
recyclable materials - cardboard, plastic wrap, polystyrene, newspapers, magazines, phone books, boxes, cartons and packaging
sanitary waste
Hazardous and dangerous waste may include:
all waste depending on the condition, environment and extent of personal exposure
asbestos
biological products
blood products
chemicals
electrical wiring
glass
hospital waste
leaking containers
medical waste
needles and syringes
oil and petrol
Non conforming waste may include:
contamination
hazardous or dangerous waste
inferior quality and unacceptable waste streams
Contaminants may include:
infestation
mixing waste types
rot or mould
sunlight
waterlogging
Other potential hazards and risks are those that may lead to:
damage to plant, vehicle or property
harm to the environment, including soil and streams
illness or injury to employees, contractors or the general public
injuries resulting from manual handling and repetitive work
Hazards and risks may include:
broken glass
burns
clinical/cytotoxic waste (e.g. dressings and sharps)
compaction equipment
contamination
corrosion
dust
fire
fumes
narrow driveways
other vehicles and equipment
overhanging signs
projectiles
spark-producing equipment
weather
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
A person who demonstrates competency in this unit must be able to provide evidence of the required skills and knowledge specified in this unit.
In particular the person should demonstrate the ability to:
identify a range of waste streams, hazardous wastes and waste contaminants
identify a range of potential hazards present in the workplace and assess risk
observe WHS/OHS requirements.
Context of and specific resources for assessment
Performance is demonstrated consistently over time and in a suitable range of contexts.
Assessment of essential required knowledge may be conducted in an off-site context. It is to comply with relevant regulatory or Australian Standards requirements.
Resource implications for assessment include:
work plans and approved specifications
forms and procedures manuals.
Method of assessment
The process of identifying waste and hazards must meet waste industry expectations. If the environment is narrowly defined or is not representative of industry needs, it may be necessary to refer to portfolio case studies to assess competency in the identification of waste and hazards.
Assessment methods must:
satisfy the endorsed Assessment Guidelines of the TLI10 Transport and Logistics Training Package, include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the required knowledge for practical application
confirm that competency is verified and able to be transferred to other circumstances and environments.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
A person who demonstrates competency in this unit must be able to provide evidence of the required skills and knowledge specified in this unit.
In particular the person should demonstrate the ability to:
identify a range of waste streams, hazardous wastes and waste contaminants
identify a range of potential hazards present in the workplace and assess risk
observe WHS/OHS requirements.
Context of and specific resources for assessment
Performance is demonstrated consistently over time and in a suitable range of contexts.
Assessment of essential required knowledge may be conducted in an off-site context. It is to comply with relevant regulatory or Australian Standards requirements.
Resource implications for assessment include:
work plans and approved specifications
forms and procedures manuals.
Method of assessment
The process of identifying waste and hazards must meet waste industry expectations. If the environment is narrowly defined or is not representative of industry needs, it may be necessary to refer to portfolio case studies to assess competency in the identification of waste and hazards.
Assessment methods must:
satisfy the endorsed Assessment Guidelines of the TLI10 Transport and Logistics Training Package, include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the required knowledge for practical application
confirm that competency is verified and able to be transferred to other circumstances and environments.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWL25 | TLIU3015 | Identify wastes and hazards in the waste management industry | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J803 | TLI33413 | Certificate III in Waste Driving Operations | Qualification |