Unit of competency Outline

Date retreived
23/07/2026 1:02 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Supervise sampling, inspections and testing at construction sites

Supervise sampling, inspections and testing at construction sites

Unit of competency
National Code
MSL975031
State Code
OAC50
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
20/07/2018
View on TGA
State Implementation and Classification
Approved Date
29/11/2018
Field of Education
019909 - Laboratory Technology
Original Release Date
29/11/2018
Nominal Hours
70
Description
This unit of competency describes the skills and knowledge to supervise and direct the placement of materials, such as soil, concrete and asphalt, at a construction site. The unit involves confirming the requirements of the inspection and testing plans, liaising with site personnel and organising sampling and testing activities, collecting reliable data and reporting results. Personnel are also expected to interpret results in the field, provide reliable advice to construction personnel, recognise and rectify obvious errors or unexpected results and troubleshoot common problems. This unit applies to technical officers working in the construction materials testing sector. This unit of competency is typically performed by experienced technicians or engineering paraprofessionals who often supervise or direct less experienced technical personnel.No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1 Prepare for on-site operations
  • 1.1 Identify the job, consult with the client and obtain relevant information, including the level of supervision required, drawings and specifications
  • 1.2 Select equipment and materials required for the job
  • 1.3 Identify site hazards and the personal protective equipment (PPE) and safety procedures specified for job
  • 1.4 Organise site induction for self and support personnel as required
  • 1.5 Record description of the job to be undertaken, compare with specification and resolve any variations
  • 1.6 Select suitable transport for site access
  • 1.7 Brief support personnel on job-specific requirements
2 Establish on-site operations
  • 2.1 Consult with the site superintendent to determine methods of communication, roles, responsibilities and expectations of each party, including identification of potential site problems and conflicts
  • 2.2 Set up facilities for supervision, testing and sample storage
  • 2.3 Inspect the site to determine the characteristics of the project, including survey control points
  • 2.4 Design inspection, sampling and testing program in accordance with specifications
3 Supervise materials placement
  • 3.1 Conduct inspection and direct sampling and testing in accordance with project requirements
  • 3.2 Direct and advise the site superintendent based on test results and observations
  • 3.3 Record test data and observations in accordance with workplace practices
  • 3.4 Send samples to the base laboratory for testing as required
  • 3.5 Ensure cleaning of equipment does not cause environmental damage
  • 3.6 Supervise the removal of equipment and materials from site
4 Analyse project data and report to client
  • 4.1 Report test results to site superintendent at specified intervals
  • 4.2 Analyse project data and provide reports to client in the agreed format and at agreed times
5 Maintain workplace records
  • 5.1 Ensure site results are documented in accordance with workplace practices
  • 5.2 Maintain security and confidentiality of workplace information
  • 5.3 Prepare and issue a final project report detailing supervision and testing carried out, statement of compliance and relevant tables and plans as required
6 Promote a safe work environment
  • 6.1 Promote the use of safe work procedures and protective equipment
  • 6.2 Minimise environmental impacts of testing/sampling and generation of waste
  • 6.3 Promote the collection and disposal of all waste in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWN90 MSL975007 Supervise sampling, inspections and testing at construction sites Unit of competency
Replaced By
State Code National Code Title Type
OEX76 MSL975059 Supervise sampling, inspections and testing at construction sites Unit of competency