Unit of competency Outline

Date retreived
23/07/2026 1:13 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare and produce specialised coatings

Prepare and produce specialised coatings

Unit of competency
National Code
MEM08005
State Code
OAW11
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030713 - Metal Casting And Patternmaking
Original Release Date
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to undertake masking and jig work, determine operational parameters, and pre-treat and treat work for an application of specialised production of industrial films on a variety of work pieces, often on a one-off basis. Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of tools is required unit MEM18001 Use hand tools and unit MEM18002 Use power tools/hand held operations, should also be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, job sheets or work instructions
2 Undertake mask and jig work
  • 2.1 Manufacture necessary jigs and shields, as required
  • 2.2 Secure jigs and ensure masking is adherent and stable
  • 2.3 Incorporate necessary auxiliary anodes and shields to specifications
3 Pre-treat and treat work
  • 3.1 Use plating information and/or specifications to calculate operating times, currents and/or voltages
  • 3.2 Treat work in accordance with specifications using SOPs
No information
No information
Replaces
State Code National Code Title Type
W5404 MEM08005B Prepare and produce specialised coatings Unit of competency