Unit of competency Outline

Date retreived
23/07/2026 4:10 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Water test engines in tanks

Water test engines in tanks

Unit of competency
National Code
AURR346975B
State Code
D7671
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
031701 - Maritime Engineering
Original Release Date
12/10/2011
Nominal Hours
16
Description
This unit of competency describes the skills and knowledge required to performance test an engine in a water tank.It requires the ability to identify and confirm work requirements, set up testing procedure, performance test an engine in a water tank and complete work finalisation processes.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Confirm nature and scope of work to be carried out
  • 1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices, applicable to the work
  • 1.3. Access and interpret repair method, workshop manuals and manufacturer information
  • 1.4. Check and prepare tools, equipment and materials
  • 1.5. Set up work area
2. Set up testing equipment
  • 2.1. Prepare engine for testing
  • 2.2. Link testing equipment to engine in accordance with manufacturer and component supplier specifications
  • 2.3. Carry out all activities according to industry regulations and guidelines, OHS and environmental legislation, and enterprise policies and procedures
3. Performance test engine
  • 3.1. Conduct test by starting and operating engine through speed ranges as specified in test procedure
  • 3.2. Document performance data during engine test sequence
  • 3.3. Compare engine performance data to manufacturer and component supplier specifications
  • 3.4. Prepare test reports and make recommendations for repairs and/or modifications
4. Clean up work area and finalise work
  • 4.1. Clean and inspect equipment and tooling according to workplace requirements
  • 4.2. Tag unserviceable equipment and faults identified in accordance with workplace requirements
  • 4.3. Clean work area, dispose of waste and scrap, and store tools and equipment in accordance with workplace procedures
  • 4.4. Finalise and process work completion documentation and give to appropriate persons, as required
No information
No information
Replaces
State Code National Code Title Type
W2954 AURR346975A Water test engines in tanks Unit of competency
Replaced By
State Code National Code Title Type
WF332 AURRTE3010 Water test engines in tanks Unit of competency
State Code National Code Title Type
D537 AUR20611 Certificate II in Marine Qualification
D541 AUR30511 Certificate III in Marine Qualification