Unit of competency Outline

Date retreived
24/07/2026 12:46 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install staging elements

Install staging elements

Unit of competency
National Code
CUASTA302
State Code
WI217
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
15/01/2016
View on TGA
State Implementation and Classification
Approved Date
16/05/2014
Field of Education
100103 - Drama And Theatre Studies
Original Release Date
16/05/2014
Nominal Hours
80
Description
This unit describes the performance outcomes, skills and knowledge required to install a range of staging elements for live productions in the entertainment and events industries.At this level, individuals are required to use some discretion and judgement and operate under broad supervision within an established framework of plans and procedures.The National Standard for Licensing Persons Performing High Risk Work applies to persons performing dogging and rigging work. Completion of the following units is required for certification at either basic, intermediate or advanced levels:CPCCLDG3001A Licence to perform doggingCPCCLRG3001A Licence to perform rigging basic levelCPCCLRG3002A Licence to perform rigging intermediate levelCPCCLRG4001A Licence to perform rigging advanced levelSets and staging for some performances or events may fall within the definition of construction work. If so, people entering a construction site are required to complete the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (Australian Safety Compensation Council, May 2007).Achievement of the unit ‘CPCCOHS1001A Work safely in the construction industry’ fulfils this requirement.
Notes
Elements and Performance Criteria
1. Prepare to install staging elements
  • 1.1 Confirm staging installation requirements in consultation with relevant personnel and with reference to stage plans and other documentation
  • 1.2 Take account of bump-in schedule when preparing venue and applying stage plans to venue layout
  • 1.3 Where there is an existing stage, communicate modifications clearly to relevant personnel and implement as required
  • 1.4 Install equipment and necessary structures in consultation with relevant personnel
  • 1.5 Comply with safety guidelines and licensing requirements when pre-rigging equipment
2. Complete staging installation tasks
  • 2.1 Mark out ground plans on stage according to design specifications and venue requirements
  • 2.2 Install staging elements according to production requirements and in the agreed sequence
  • 2.3 Follow safe work practices at all times and comply with equipment manufacturer instructions during the installation process
  • 2.4 Use appropriate equipment to assist with staging installation
  • 2.5 Complete work tasks within production or event deadlines
3. Check staging elements after installation
  • 3.1 Check each staging element to ensure operational standards for performance are achieved and that all safety requirements have been met
  • 3.2 Identify problems with staging elements, take appropriate action to rectify or refer to relevant personnel for action
  • 3.3 Identify modifications required to improve suitability for performance and take appropriate action
  • 3.4 Complete and distribute workplace documentation as required
No information
No information
Replaces
State Code National Code Title Type
D1602 CUESTA01C Install staging elements Unit of competency
Replaced By
State Code National Code Title Type
ODH41 CUASTA312 Install staging elements Unit of competency