Unit of competency Outline

Date retreived
23/07/2026 1:35 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Debark logs mechanically

Debark logs mechanically

Unit of competency
National Code
FWPCOT2226
State Code
AXL76
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
2.00
Current Release Date
21/02/2018
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
05/10/2016
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to debark logs mechanically to a set diameter and length in a saw mill or wood processing plant. The unit applies to individuals who debark logs using mechanical equipment. Operators generally work under broad direction and take responsibility for their work.No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for debarking
  • 1.1 Review work order and clarify with appropriate personnel
  • 1.2 Assess type and quantity of logs to be processed by mechanical debarker
  • 1.3 Select equipment and check for operational effectiveness
  • 1.4 Plan debarking process in line with site work, health and safety and operating procedures and environmental requirements
  • 1.5 Identify emergency plan procedures to follow in the event of an emergency
  • 1.6 Establish and maintain communication with others in line with work health and safety requirements
2. Debark logs
  • 2.1 Carry out pre-operational checks on mechanical debarker in line with workplace procedures or manufacturers' recommendations
  • 2.2 Feed material into the machine at the rate prescribed by workplace requirements
  • 2.3 Regularly check and adjust conveyors to maximise feed rate and maintain desired quality and output
  • 2.4 Segregate logs with defects and dispose of in line with site procedures and environmental requirements
  • 2.5 Direct debarked logs to storage in a designated location in line with work order
  • 2.6 Report processing faults to appropriate personnel
3. Conduct operator maintenance
  • 3.1 Lock-out mechanical debarker in line with site procedures
  • 3.2 Conduct visual inspection to identify issues and faults
  • 3.3 Check mechanical debarker for blunt of damaged cutters and remove and replace, in line with manufacturers' specifications
  • 3.4 Repair or replace blunt or damaged cutters in line with site procedures and environmental requirements
  • 3.5 Record and report mechanical debarker operations, faults and maintenance activities
No information
No information
Replaces
State Code National Code Title Type
D5903 FPICOT2226B Debark logs mechanically Unit of competency
State Code National Code Title Type
BAL2 FWP20316 Certificate II in Sawmilling and Processing Qualification
BAK9 FWP20416 Certificate II in Wood Panel Products Qualification