Unit of competency Outline

Date retreived
23/07/2026 4:41 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce complex laminated product

Produce complex laminated product

Unit of competency
National Code
ICPCBF3820
State Code
OBP63
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
50
Description
This unit describes the skills and knowledge required to produce complex laminated product, to monitor and adjust machinery, maintain transportation of the substrate, identify and rectify faults, and clean and shut down equipment.It applies to individuals who work under direct supervision with limited responsibility in preparing materials and equipment and resolving issues to produce a finished product.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain operation of reel transportation and delivery systems
  • 1.1 Monitor and adjust reel stand and web control system according to work health and safety (WHS) requirements
  • 1.2 Add substrate to and remove substrate from the process according to job specifications
  • 1.3 Monitor and adjust reel rewind and sheeting section
2. Maintain complex laminating process
  • 2.1 Check and adjust registration of laminating
  • 2.2 Monitor and adjust pressures and adhesion
3. Maintain production processes
  • 3.1 Monitor and adjust in-line process(es)
  • 3.2 Use machine controls as required
  • 3.3 Monitor and verify performance using the process control system
  • 3.4 Observe and adjust starch performance throughout production run
  • 3.5 Report process adjustments to eliminate problems according to enterprise procedures
4. Identify and rectify machine operating problem
  • 4.1 Identify and report problems in machine operation according to enterprise procedures
  • 4.2 Carry out adjustments or corrections according to specified procedures, and within scope of own role
  • 4.3 Verify repairs and adjustments as required prior to resumption of operations
5. Conduct shutdown of production process
  • 5.1 Follow shutdown sequence according to manufacturer specifications and enterprise procedures
  • 5.2 Remove solid and liquid waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
  • 5.3 Clean and disengage all required parts of machinery used in printing process according to manufacturer specifications and enterprise procedures
  • 5.4 Complete required production records and enterprise documentation
No information
No information
Replaces
State Code National Code Title Type
AUO56 ICPCBF382 Produce complex laminated product Unit of competency