Unit of competency Outline

Date retreived
23/07/2026 6:45 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Check and repair track geometry

Check and repair track geometry

Unit of competency
National Code
TLIB3094A
State Code
D4996
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/03/2011
View on TGA
State Implementation and Classification
Approved Date
07/07/2011
Field of Education
039907 - Rail Operations
Original Release Date
07/07/2011
Nominal Hours
35
Description
This unit involves the skills and knowledge required to check and repair track geometry in accordance with safeworking and regulatory requirements and workplace procedures. It includes determining the job requirements, restoring track geometry, certifying track after work, and completing all required documentation. Licensing or certification requirements are not applicable to this unit.
Notes
Elements and Performance Criteria
1Determine job requirements
  • 1.1 Faults and deficiencies in track geometry are identified, and work required for restoration of track to required standard is determined
  • 1.2 Appropriate repair methods are identified to enable repairs to be effected
  • 1.3 Job requirements and resources are determined in accordance with workplace procedures and as per scope of work
2Restore track geometry
  • 2.1 Survey data are used where required to establish correct geometry
  • 2.2 Appropriate lifting and lining methods and equipment are used to lift and line track to restore running surface to required geometry in accordance with workplace standards and procedures
3Certify track after work
  • 3.1 Track geometry is checked for compliance with acceptance standards
  • 3.2 Vertical and horizontal structural and overhead clearances are checked against required standards to allow safe passage of trains
  • 3.3 Track structure where work has been undertaken is checked for compliance to standards required to enable reinstatement of service
  • 3.4 Appropriate operating conditions are applied in accordance with workplace procedures
4Complete documentation
  • 4.1 Documentation on work undertaken is completed in accordance with workplace requirements
No information
No information
Replaced By
State Code National Code Title Type
S8268 TLIB3094B Check and repair track geometry Unit of competency
State Code National Code Title Type
W932 TLI32510 Certificate III in Rail Infrastructure Qualification