Unit of competency Outline

Date retreived
24/07/2026 5:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fit required external items to a recreational vehicle

Fit required external items to a recreational vehicle

Unit of competency
National Code
MSMRV321
State Code
AWC58
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
15/12/2015
View on TGA
State Implementation and Classification
Approved Date
04/05/2016
Field of Education
040319 - Furnishing Installation
Original Release Date
04/05/2016
Nominal Hours
20
Description
This unit of competency covers the skills and knowledge required to fit external items, such as corner mouldings, trunk doors, wheel spats, picnic tables and awnings, to a recreational vehicle. The work will be carried out in a recreational vehicle manufacturing facility.This unit of competency covers the preparation for, fitting of, and clean-up after the fitting of external items.The operator will be required to work to procedures, and follow plans/specifications for what is required.This unit of competency applies to an individual working alone or as part of a team/work group and working in liaison with other shift team members.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan the work
  • 1.1 Review the requirements of the work
  • 1.2 Check required tools and jigs are available at the worksite
  • 1.3 Check required materials and components are available at the worksite
  • 1.4 Identify any hazards and the related hazard controls
  • 1.5 Check the hazard controls are in place and operational
  • 1.6 Query any items that are different to usual and clarify requirements
2 Fit the external items in accordance with procedures
  • 2.1 Use relevant hazard controls, including personal protective equipment (PPE)
  • 2.2 Place the item in the required position
  • 2.3 Clamp/hold item in place as required
  • 2.4 Drill holes/make any penetrations required
  • 2.5 Fix item as required
  • 2.6 Trim as required
  • 2.7 Complete fitting of items as required
3 Fit the seals in accordance with procedures
  • 3.1 Use relevant hazard controls, including PPE
  • 3.2 Place seals in the required position
  • 3.3 Clamp/hold seals in place as required
  • 3.4 Drill holes/make any penetrations required
  • 3.5 Fix seal as required
  • 3.6 Trim seal as required
  • 3.7 Complete fitting of seal as required
4 Finish fitting the external items
  • 4.1 Check items have been fitted correctly and make any required adjustments
  • 4.2 Clean up recreational vehicle and work area, leaving it ready for the next job
  • 4.3 Segregate and handle waste in accordance with procedures
  • 4.4 Complete any required documentation/records
No information
No information
Replaced By
State Code National Code Title Type
OFD49 MSMRV377 Install recreational vehicle external items Unit of competency