Unit of competency Outline

Date retreived
23/07/2026 10:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Store and distribute pulped product

Store and distribute pulped product

Unit of competency
National Code
PPMPUL250
State Code
AXI39
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
06/05/2016
View on TGA
State Implementation and Classification
Approved Date
25/08/2016
Field of Education
089901 - Purchasing, Warehousing And Distribution
Original Release Date
25/08/2016
Nominal Hours
15
Description
This unit of competency describes the outcome required to load, unload, transport and store pulped product.The unit applies to production support operators who work in a pulp or paper manufacturing facility.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for handling operations
  • 1.1. Identify handling requirements and where required check with appropriate personnel.
  • 1.2. Select appropriate personal protective and load shifting equipment and complete pre-operational checks to ensure operational effectiveness.
  • 1.3. Inspect type and quantity of material for relocation and check work area for potential hazards, obstructions and spillage.
  • 1.4. Confirm availability of required materials.
2. Load and unload product
  • 2.1. Use load shifting equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.
  • 2.2. Use communication signals to notify nearby personnel of impending operation.
  • 2.3. Estimate material dimensions and weight to ensure load and equipment is stable.
  • 2.4. Load or unload product direct from the production line; observe and respond to people and hazards present.
3. Transport and store product
  • 3.1. Transport product to appropriate storage location.
  • 3.2. Identify, isolate and report non-conformant product.
  • 3.3. Store product in approved configurations in relevant stock locations.
4. Document and report product information
  • 4.1. Identify products with appropriate labels as required
  • 4.2. Compile and verify inventory records in line with organizational procedures.
  • 4.3. Communicate problems or variations with process, product or equipment to relevant personnel.
No information
No information
Replaces
State Code National Code Title Type
AUY31 FPPPUL250A Store and distribute pulped product Unit of competency
Replaced By
State Code National Code Title Type
ODU15 PPMPUL202 Store and distribute pulped product Unit of competency
State Code National Code Title Type
BAH5 PPM20216 Certificate II in Papermaking Operations Qualification
BAH4 PPM20116 Certificate II in Pulping Operations Qualification