Unit of competency Outline

Date retreived
23/07/2026 7:36 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Manage the preparation of motor sport competition vehicles

Manage the preparation of motor sport competition vehicles

Unit of competency
National Code
AURMMA002
State Code
AXC10
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
40
Description
This unit describes the performance outcomes required to develop competition vehicle preparation specifications, checklists and schedules, and to supervise the preparation and assembly of a motor sport competition vehicle. It involves researching information, assessing personnel capabilities and schedule constraints, and supervising others to prepare a competition vehicle and check the post-preparation vehicle and work area.It applies to those working in the motor sport industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Develop preparation specifications and checklists
  • 1.1 Job requirements are determined from competition information
  • 1.2 Rules, regulations, and vehicle specifications and tolerances are analysed for competitive advantage
  • 1.3 Work specifications are documented and communicated to appropriate personnel
2. Develop preparation schedule
  • 2.1 Equipment and capabilities of required personnel to meet job specifications are identified and sourced
  • 2.2 Constraints to schedule are analysed and optimum sequence for vehicle preparation is documented
  • 2.3 Critical path is analysed and factors affecting that path are documented
  • 2.4 Preparation schedule is finalised and distributed to required personnel
3. Supervise preparation
  • 3.1 Team adherence to preparation schedule is monitored according to team requirements
  • 3.2 Work area is monitored for appropriate layout for job requirements and for cleanliness
  • 3.3 Checks of vehicle during and after installation of components are carried out to ensure accurate and complete fitting
  • 3.4 Problems with work area or operation of equipment are evaluated and resolved according to safety and environmental requirements
  • 3.5 Proposals for modifications or adaptation of equipment and components are evaluated and changes adapted or adopted as required according to team requirements
4. Supervise post-assembly checks
  • 4.1 Vehicle is inspected, and problems are identified and addressed according to team requirements
  • 4.2 Post-preparation checks and vehicle start-up by team are supervised
  • 4.3 Vehicle baseline set-up by team is supervised
  • 4.4 Clean-up of work area by team is supervised
  • 4.5 Final inspection of work area and vehicle is carried out and documentation completed
No information
No information
Replaces
State Code National Code Title Type
WF268 AURMMA4002 Manage the preparation of a competition vehicle Unit of competency
Replaced By
State Code National Code Title Type
OCJ65 AURMMA102 Manage the preparation of motor sport competition vehicles Unit of competency
State Code National Code Title Type
BAC7 AUR30916 Certificate III in Motor Sport Technology Qualification
BAB5 AUR40316 Certificate IV in Motor Sport Technology Qualification