Unit of competency Outline

Date retreived
23/07/2026 5:21 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Replace saws, blades and guides

Replace saws, blades and guides

Unit of competency
National Code
FWPCOT3212
State Code
AXL50
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030715 - Precision Metalworking
Original Release Date
05/10/2016
Nominal Hours
40
Description
This unit of competency describes the outcomes required to remove blunt or damaged saw blades, knives and guides and to install reconditioned ones in various types of cutting equipment. Work is completed in a forest products factory setting.The unit applies to Sawdoctor, Saw repairer.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for replacement
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate repair, maintenance and personal protective equipment and check for operational effectiveness.
  • 1.3 Transport saws, blades and guides for replacement to designated machinery, using mechanical lifting aids as required.
  • 1.4 Plan replacement process in line with work order.
2. Replace saws, blades and guides
  • 2.1 Follow organisational safety procedures throughout all repair and maintenance repair processes.
  • 2.2 Lock-out equipment and remove mechanical and safety components to provide access to saws or blades and guides without damaging components.
  • 2.3 Store removed components temporarily in a safe location.
  • 2.4 Replace blades and guides in line with manufacturer’s recommendations.
  • 2.5 Replace and secure mechanical and safety components in line with manufacturer recommendations.
  • 2.6 Check serviced equipment for correct alignment, position and overall free operational performance.
  • 2.7 Dispose of used blades and guides in line with environmental protection practices or transfer for reconditioning.
  • 2.8 Record and report processing problems and equipment faults to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D5923 FPICOT3212B Replace saws, blades and guides Unit of competency
Replaced By
State Code National Code Title Type
OBM49 FWPCOT3280 Replace saw blades, knives and guides Unit of competency