Unit of competency Outline

Date retreived
22/07/2026 7:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor, inspect and report catchment operations

Monitor, inspect and report catchment operations

Unit of competency
National Code
NWPSOU012
State Code
AVY53
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/12/2015
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
010711 - Hydrology
Original Release Date
15/04/2016
Nominal Hours
20
Description
This unit describes the skills required to inspect and monitor catchment areas, monitor flows and coordinate catchment processes. The ability to collect data and samples, monitor and adjust regulatory systems, identify and investigate catchment problems and produce technical reports is essential to performance.This unit applies to those working as field staff with a specific responsibility for inspecting, monitoring and reporting catchment operations. The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those related to WHS. Those undertaking this unit would work under indirect supervision while performing routine tasks ensuring minimum damage to the environment, in a familiar context. The level of responsibility may vary according to the size and complexity of the catchment area.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Inspect and monitor catchment operations
  • 1.1 Identify and apply work requirements for undertaking inspections of catchments and surrounding areas.
  • 1.2 Schedule routine inspections of catchment areas to identify water quality risks.
  • 1.3 Inspect and monitor designated locations according to agreed schedule and procedures.
  • 1.4 Inspect flow regulating systems and determine required adjustments to meet demand.
  • 1.5 Select, fit and use required safety equipment, including personal protective equipment.
2. Operate and report catchment conditions
  • 2.1 Measure and record catchment inflows and outflows or extractions.
  • 2.2 Collect and record water samples according to sampling requirements.
  • 2.3 Identify organisation standards for the condition and maintenance of catchment environment.
  • 2.4 Identify and report changes to environmental conditions.
  • 2.5 Identify and report flows into, and conditions of, catchment areas.
3. Assist in investigating hazards, risks and catchment security
  • 3.1 Identify and report activities within catchment that pose a hazard or risk to the public, water quality or the environment.
  • 3.2 Identify and report activities of external parties within the catchment and surrounding area that breach organisational guidelines.
  • 3.3 Check and confirm public complaints and report to relevant personnel.
4. Complete documentation
  • 4.1 Collect and analyse catchment data.
  • 4.2 Review and action investigation results.
  • 4.3 Compile reports from catchment inspections.
No information
No information
Replaces
State Code National Code Title Type
D1857 NWP240B Inspect and report catchment and surrounding areas Unit of competency
Replaced By
State Code National Code Title Type
OBO37 NWPCAD005 Monitor, inspect and report catchment areas Unit of competency
State Code National Code Title Type
BDK0 DEF40617 Certificate IV in Preventive Health Qualification
AYW4 NWP20115 Certificate II in Water Industry Operations Qualification