Unit of competency Outline

Date retreived
22/07/2026 11:47 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare vaults or crypts for burials

Prepare vaults or crypts for burials

Unit of competency
National Code
SIFCBCR013
State Code
WG578
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
21/06/2013
View on TGA
State Implementation and Classification
Approved Date
16/07/2013
Field of Education
110399 - Personal Services, N.e.c.
Original Release Date
16/07/2013
Nominal Hours
20
Description
This unit describes the performance outcomes, skills and knowledge required to open mausoleum crypts or below ground burial vaults, check their condition and prepare for burials. It applies to cemetery and crematorium staff involved in burial works, and involves working under supervision and according to work health and safety, relevant legislation and workplace policies and procedures.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Open vault or crypt.
  • 1.1 Liaise with supervisor and team members to identify and confirm work requirements.
  • 1.2 Confirm vault or crypt for opening.
  • 1.3 Identify, prepare and use personal protective equipment.
  • 1.4 Select, assemble and use tools and equipment according to work requirements.
  • 1.5 Check tools and equipment for serviceability and report faults.
  • 1.6 Detect and report safety hazards and take corrective action.
  • 1.7 Remove face plate if appropriate.
  • 1.8 Break sealant strip sealing the vault or crypt and remove lid.
2. Check condition of vault or crypt.
  • 2.1 Inspect vault or crypt to determine condition and identify fluid seepage.
  • 2.2 Remove fluid using appropriate equipment.
  • 2.3 Enter and exit vaults or crypts according to an agreed procedure for confined spaces.
  • 2.4 Create ridges where appropriate.
  • 2.5 Place lifting or lowering devices and equipment in preparation for burial.
  • 2.6 Prepare burial service area according to special requirements.
3. Clean work area.
  • 3.1 Clean vault or crypt and surrounds to cemetery’s presentation standards.
  • 3.2 Remove, clean and store tools and equipment.
  • 3.3 Present vault or crypt according to client requirements.
No information
No information
No information
State Code National Code Title Type
J576 SIF30213 Certificate III in Gravedigging, Grounds and Maintenance Qualification