Unit of competency Outline

Date retreived
23/07/2026 6:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect and operate surface water systems

Inspect and operate surface water systems

Unit of competency
National Code
NWPIRR003
State Code
AVZ09
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/12/2015
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
010711 - Hydrology
Original Release Date
15/04/2016
Nominal Hours
30
Description
This unit describes the skills required to inspect and coordinate the operation of surface water systems and to measure and report on surface water usage and system performance. The ability to collect data, monitor and adjust regulatory systems, coordinate system performance and produce technical reports are essential to performance.This unit applies to those working as field operators with a specific responsibility for inspecting and operating surface water systems and for ensuring that flows are regulated according to organisational specifications and system demands.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those related to WHS.Those undertaking this unit would work under indirect supervision, while performing routine tasks ensuring minimum damage to the environment, in a familiar context. No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Inspect and report on surface water system performance and usage
  • 1.1 Schedule and complete routine inspections of surface supply areas.
  • 1.2 Collect and record data on system capacity and flow.
  • 1.3 Select, fit and use required safety equipment, including personal protective equipment.
2. Monitor inflows, outflows and releases
  • 2.1 Inspect flow regulating systems and make adjustments to meet demand requirements.
  • 2.2 Monitor flows and coordinate diversions or extractions to control usage.
  • 2.3 Read meters and record volumes.
3. Operate and coordinate system performance
  • 3.1 Address and record process faults and operational conditions.
  • 3.2 Optimise process performance.
4. Complete documentation
  • 4.1 Record inspections results.
  • 4.2 Report data from inspection results.
No information
No information
Replaces
State Code National Code Title Type
D1904 NWP322B Inspect and operate surface water systems Unit of competency
Replaced By
State Code National Code Title Type
OBO06 NWPIWS003 Inspect and operate water diversion systems Unit of competency