Unit of competency Outline

Date retreived
23/07/2026 9:55 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out low voltage electrical field testing and report findings

Carry out low voltage electrical field testing and report findings

Unit of competency
National Code
UEEEL0027
State Code
OBY87
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
29/11/2024
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
12/07/2021
Nominal Hours
54
Description
This unit involves the skills and knowledge required to carry out low voltage (LV) electrical field testing and report findings.It includes preparing, inspecting and testing of electrical field systems, documenting and reporting test results.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Notes
Elements and Performance Criteria
1 Prepare to carry out electrical field inspection and testing
  • 1.1 WHS/OHS requirements and workplace procedures for a given work area are identified, obtained and applied
  • 1.2 WHS/OHS risk control measures and workplace procedures in preparation for the work are followed
  • 1.3 Scope of work to be undertaken is determined from reports and/or discussions with appropriate person/s
  • 1.4 Advice is sought from the work supervisor to ensure work activity is coordinated effectively with others
  • 1.5 Tools, equipment and testing devices required to locate faults are obtained in accordance with workplace procedures and checked for correct operation and safety
2 Carry out electrical field inspection and testing
  • 2.1 WHS/OHS risk control measures and workplace procedures for carrying out work are followed
  • 2.2 Need to inspect, test and measure live electrical work is determined in accordance with WHS/OHS requirements and workplace procedures
  • 2.3 Circuits/machines/plant are isolated in accordance WHS/OHS requirements and workplace procedures
  • 2.4 Safety hazards from fault/s and/or breakdown are documented and risk control measures implemented in consultation with appropriate person/s
  • 2.5 Field testing and measuring techniques of electrical systems, circuits, and apparatus are conducted in accordance with workplace procedures
  • 2.6 Circuit/apparatus/components are dismantled as required to facilitate testing and parts stored for protection against loss or damage
  • 2.7 Tests are determined from report and appropriate testing/measuring instruments selected in accordance with manufacturer instructions and relevant industry standards
  • 2.8 Unplanned events are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
  • 2.9 Testing activities are carried out without damage to apparatus, circuits, environment or services using sustainable energy practices
3 Complete electrical field testing and report findings
  • 3.1 WHS/OHS work completion risk control measures and workplace procedures are followed
  • 3.2 Apparatus is reassembled after testing as required and work area is cleaned and made safe in accordance with workplace procedures
  • 3.3 Test findings and recommendation for actions are reported in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC490 UEENEEG132A Carry out low voltage electrical field testing and report findings Unit of competency