Unit of competency Outline
Date retreived
24/07/2026 12:29 AM AWST
24/07/2026 12:29 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform routine maintenance on a vessel up to 24 metres
Perform routine maintenance on a vessel up to 24 metres
Unit of competency
National Code
MARB3004A
MARB3004A
State Code
WG364
WG364
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
20/12/2013
Field of Education
031701 - Maritime Engineering
Original Release Date
20/12/2013
Nominal Hours
36
Description
This unit involves the skills and knowledge required to perform routine remedial, preventative and survey deck maintenance. It includes basic deck maintenance, cleaning tasks, marine painting, and servicing deck machinery and systems on commercial vessels up to 24 metres.
Notes
Elements and Performance Criteria
1 Plan maintenance tasks
- 1.1 Planned maintenance system is accessed to establish maintenance requirements for vessel
- 1.2 Maintenance tasks are proposed and prioritised in conjunction with others involved in or affected by the maintenance work
- 1.3 Resource requirements are identified and allocated to ensure efficient completion of tasks
- 1.4 Maintenance tasks to be performed are recorded in a maintenance schedule according to organisational procedures
2 Perform basic deck maintenance
- 2.1 Deck surfaces are checked according to planned maintenance system
- 2.2 Any deterioration or corrosion of vessel deck surfaces is identified and appropriate maintenance action is carried out according to planned maintenance system
- 2.3 Minor faults and imperfections in paint surfaces are repaired according to organisational procedures
- 2.4 Weathered surfaces are restored using cleaners and liquid abrasives according to manufacturer instructions and organisational procedures
- 2.5 Tools and equipment are used correctly and safely
- 2.6 Maintenance materials are obtained, prepared and applied according to organisational procedures and manufacturer instructions
3 Carry out cleaning activities
- 3.1 Area to be cleaned is prepared and hazards are identified
- 3.2 Work area is barricaded or warning signs provided, as appropriate, to reduce risk to other crew members
- 3.3 Correct chemicals and cleaning agents are selected and applied according to manufacturer instructions and work health and safety (WHS)/occupational health and safety (OHS) requirements
- 3.4 Equipment is used correctly and safely
- 3.5 Cleaning tasks are completed according to organisational procedures and manufacturer instructions
4 Prepare and paint surfaces
- 4.1 Suitable personal protective clothing is selected and used according to WHS/OHS requirements
- 4.2 Surfaces are prepared using correct equipment
- 4.3 Rust remover, rust converter and undercoats are applied according to manufacturer specifications
- 4.4 Paints are mixed in correct proportions according to manufacturer specifications
- 4.5 Paint is applied using appropriate application equipment
5 Carry out routine maintenance of deck fittings, equipment and systems
- 5.1 Fittings and equipment are inspected and inspection results are compared with manufacturer specifications
- 5.2 Maintenance tasks are carried out to specification
- 5.3 Mechanical equipment and system components are checked with appropriate instruments
- 5.4 Faulty items or components are identified and maintenance procedures selected
- 5.5 Unserviceable equipment is tagged and faults are identified according to organisational procedures
6 Repair/replace faulty fittings and equipment
- 6.1 Fittings and equipment are safely isolated according to regulations and WHS/OHS requirements
- 6.2 Faulty fittings or equipment are removed using appropriate tools, equipment and procedures
- 6.3 Replaceable items are selected or serviceable items are fitted according to manufacturer specifications
- 6.4 Adjustments are made to fittings or equipment to comply with specifications
- 6.5 Operational check is carried out to ensure compliance with manufacturer specifications
- 6.6 Maintenance report is completed according to organisational procedures
7 Supervise crew in completing maintenance tasks
- 7.1 Workload is organised in order of priority according to planned maintenance system
- 7.2 Maintenance tasks are allocated to appropriate crew members with consideration of individual experience and qualifications
- 7.3 Crew members are clearly briefed on their responsibility and maintenance tasks and WHS/OHS requirements
- 7.4 Guidance is provided appropriate to maintenance task and individual experience
- 7.5 Completed work is checked to ensure maintenance is performed according to organisational procedures
8 Clean up
- 8.1 Work area is cleared and cleaned for serviceable condition
- 8.2 Materials are disposed of or recycled according to legislative and organisational requirements
- 8.3 Tools and equipment are cleaned, checked and stored according to organisational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below.
Maintenance tasks may include:
Fire and bilge pumps
Lifesaving appliances
Greasing and oiling
Ropes and wires
Rust prevention
Area may include:
Battery room
Engine room
Exposed deck area
Firefighting equipment spaces
Store room
Wheelhouse and accommodation area
Fittings and equipment may include:
Fuel, fresh and ballast water, bilge and firefighting pumps
Lifting equipment
Navigation lights and shapes
Sounding and ventilation arrangements
Steering gear
Windlass and capstan
Materials may include:
Cleaning chemicals
Paint residues
Rags
Spent oil
Maintenance tasks may include:
Fire and bilge pumps
Lifesaving appliances
Greasing and oiling
Ropes and wires
Rust prevention
Area may include:
Battery room
Engine room
Exposed deck area
Firefighting equipment spaces
Store room
Wheelhouse and accommodation area
Fittings and equipment may include:
Fuel, fresh and ballast water, bilge and firefighting pumps
Lifting equipment
Navigation lights and shapes
Sounding and ventilation arrangements
Steering gear
Windlass and capstan
Materials may include:
Cleaning chemicals
Paint residues
Rags
Spent oil
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, the required skills and knowledge, the range statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the Elements, Performance Criteria, Required Skills, Required Knowledge and include:
working safely at all times
attention to appropriate level of detail in recordkeeping.
Context of and specific resources for assessment
Performance is demonstrated consistently over time and in a suitable range of contexts.
Resources for assessment include access to:
industry-approved marine operations site where routine maintenance on a vessel up to 24 metres may be conducted
tools, equipment and personal protective equipment currently used in industry
relevant regulatory and equipment documentation that impacts on work activities
range of relevant exercises, case studies and/or other simulated practical and knowledge assessments
appropriate range of relevant operational situations in the workplace.
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals.
Method of assessment
Practical assessment must occur in an:
appropriately simulated workplace environment and/or
appropriate range of situations in the workplace.
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate to this unit:
direct observation of the candidate performing routine maintenance on a vessel up to 24 metres
direct observation of the candidate applying relevant WHS/OHS requirements and work practices.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.
In all cases where practical assessment is used it should be combined with targeted questioning to assess Required Knowledge.
Assessment processes and techniques must be appropriate to the language and literacy requirements of the work being performed and the capacity of the candidate.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the Elements, Performance Criteria, Required Skills, Required Knowledge and include:
working safely at all times
attention to appropriate level of detail in recordkeeping.
Context of and specific resources for assessment
Performance is demonstrated consistently over time and in a suitable range of contexts.
Resources for assessment include access to:
industry-approved marine operations site where routine maintenance on a vessel up to 24 metres may be conducted
tools, equipment and personal protective equipment currently used in industry
relevant regulatory and equipment documentation that impacts on work activities
range of relevant exercises, case studies and/or other simulated practical and knowledge assessments
appropriate range of relevant operational situations in the workplace.
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals.
Method of assessment
Practical assessment must occur in an:
appropriately simulated workplace environment and/or
appropriate range of situations in the workplace.
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate to this unit:
direct observation of the candidate performing routine maintenance on a vessel up to 24 metres
direct observation of the candidate applying relevant WHS/OHS requirements and work practices.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.
In all cases where practical assessment is used it should be combined with targeted questioning to assess Required Knowledge.
Assessment processes and techniques must be appropriate to the language and literacy requirements of the work being performed and the capacity of the candidate.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH797 | MARB004 | Perform routine maintenance on a vessel up to 24 metres | Unit of competency |
