Unit of competency Outline

Date retreived
22/07/2026 4:49 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select materials and new technologies for jewellery and 3D object design applications

Select materials and new technologies for jewellery and 3D object design applications

Unit of competency
National Code
MEM19028A
State Code
S7580
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/09/2011
View on TGA
State Implementation and Classification
Approved Date
29/08/2014
Field of Education
100307 - Jewellery Making
Original Release Date
29/08/2014
Nominal Hours
18
Description
This unit of competency covers the skills and knowledge required to select materials and technologies for jewellery and 3D object design applications. It includes evaluating the benefits and limitations of different materials and technologies and determining best options to meet specific design and application requirements.
Notes
Elements and Performance Criteria
1 Select materials for jewellery or object applications
  • 1.1 Identify properties, features and typical applications of metals and metal alloys used in jewellery or objects
  • 1.2 Identify properties, features and typical applications of alternative materials used in jewellery or objects
  • 1.3 Evaluate materials for suitability and compatibility against jewellery or object design requirements, product descriptions and/or drawings
  • 1.4 Consider benefits and limitations of working with or adding alternate materials against the design brief
  • 1.5 Identify and compare alternative options and, if necessary, consult with appropriate persons
  • 1.6 Select final materials based on design requirements, design considerations, drawings, product description, principal material properties and processing requirements
  • 1.7 Confirm selection of materials with appropriate persons
2 Select manufacturing technologies and processes for jewellery or object applications
  • 2.1 Identify jewellery or object manufacturing technologies and processes suitable to jewellery and 3D object production
  • 2.2 Identify manufacturing technologies and processes suited to specific jewellery and 3D object applications and materials
  • 2.3 Consider capabilities and limitations of different technologies and processes against design brief and other design considerations
  • 2.4 Identify and compare alternative technologies and processes and, if necessary, consult with appropriate persons
  • 2.5 Select manufacturing technologies and processes based on design requirements, design considerations, drawings, product description and appropriateness to selected materials
  • 2.6 Confirm selection of jewellery or object manufacturing technologies and processes with appropriate personnel
3 Finalise drawing for presentation
  • 3.1 Select drawing presentation and production technique to enhance impact of jewellery or object design features and to appeal to the intended audience
  • 3.2 Use/store/file/copy/issue working and reference drawings/illustrations in accordance with standard operating procedures
  • 3.3 Prepare supporting information to accompany drawing, as required
Features and properties
Features and properties may include:
physical properties and behaviour
visual appearance
colour
availability/rarity
Design considerations
Design considerations may include:
cost/economic viability
policy/preference
manufacturing requirements
aesthetic value
relevance to the design proposal
practicality
safety
ergonomics
cultural and social influences
sustainability
Appropriate personnel
Appropriate personnel may include:
supervisor
manager
trainer
mentor
teacher
team member
client
Metals
Metals may include:
precious metals and alloys
base metals
refractory metals
Alternative materials
Alternative materials may include:
plastics and polymers
resins
ceramics
composites
synthetic materials
naturally found objects
wood
rubber
silicon
glass
Manufacturing technologies and processes
Manufacturing technologies and processes may include:
water jet and laser cutting
casting (clay, vacuum and centrifugal)
pressing and stamping
forging
welding
rolling and extruding
machining
spinning
anodising and electroplating
powder coating
moulding
rapid prototyping
Occupational health and safety (OHS) requirements
OHS requirements may include:
legislation
protective equipment
material safety management systems
hazardous substances and dangerous goods code
local safe operation procedures
awards provisions
Environmental requirements
Environmental requirements may relate to:
liquid waste
solid waste
gas, fumes, vapour, smoke emissions, including fugitive emissions, and dust
excessive energy and water use
excessive noise
Enterprise procedures
Enterprise procedures may include:
the use of tools and equipment
instructions, including job sheets, cutting lists, plans, drawings and designs
reporting and communication
manufacturer specifications
operational procedures
Overview of assessment
A person who demonstrates competency in this unit must be able to apply a range of drawing techniques to demonstrate features of jewellery or object construction and prepare drawing for presentation according to the audience needs.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently:
apply OHS workplace procedures and practices, including the use of risk control measures
identify benefits and limitations of materials and manufacturing processes in achieving outcomes in jewellery and object design applications
select materials for jewellery and 3D object applications
select manufacturing technologies and processes for jewellery and 3D object applications.
Context of and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment. Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.
Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.
Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the MEM05 Metal and Engineering Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.
Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application.
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Assessment may be in conjunction with assessment of other units of competency where required.
Guidance information for assessment
Assessment processes and techniques must be culturally appropriate and appropriate to the language and literacy capacity of the candidate and the work being performed.
Replaced By
State Code National Code Title Type
OEV50 MEM19028 Select materials and new technologies for jewellery or 3D object design applications Unit of competency