Unit of competency Outline

Date retreived
23/07/2026 11:45 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply critical control point requirements

Apply critical control point requirements

Unit of competency
National Code
MSL933003
State Code
AWO51
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
080317 - Quality Management
Original Release Date
16/08/2016
Nominal Hours
40
Description
This unit of competency covers the ability to monitor critical, quality and regulatory control points related to a person's work responsibilities. This unit of competency also covers support for ongoing improvement of the workplace hazard analysis and critical control points (HACCP) plan.This unit of competency is applicable to production operators and laboratory assistants in the food processing and manufacturing sectors. Control points refer to those key points in a work process that must be monitored and controlled.While no specific licensing or certification requirements apply to this unit at the time of publication, laboratory operations are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked.
Notes
Elements and Performance Criteria
1 Provide routine input to the HACCP plan
  • 1.1 Obtain information about control points in the manufacturing process
  • 1.2 Locate control points for own work area responsibilities
  • 1.3 Perform relevant checks and inspections on materials and equipment to establish conformance to meet requirements
  • 1.4 Identify variations or common faults
  • 1.5 Record inspection results and report to appropriate personnel
2 Contribute to the continuous improvement of the HACCP plan
  • 2.1 Recognise non-conformance to the HACCP plan
  • 2.2 Identify likely causes for non-conformance
  • 2.3 Record and report non-conformances to appropriate personnel
3 Maintain a safe work environment
  • 3.1 Use established safe work practices and personal protective equipment (PPE) to ensure personal safety and that of other personnel
  • 3.2 Report potential hazards and/or maintenance issues in own work area to designated personnel
  • 3.3 Minimise the generation of waste and environmental impacts
  • 3.4 Dispose of waste in accordance with workplace procedures, relevant codes and regulations
No information
No information
Replaces
State Code National Code Title Type
WA677 MSL933003A Apply critical control point requirements Unit of competency
Replaced By
State Code National Code Title Type
OAC88 MSL933007 Apply critical control point requirements Unit of competency