Unit of competency Outline

Date retreived
22/07/2026 11:51 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Contribute to the design of basic mechanical systems

Contribute to the design of basic mechanical systems

Unit of competency
National Code
MEM30009A
State Code
W5448
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
29/08/2012
View on TGA
State Implementation and Classification
Approved Date
19/08/2014
Field of Education
030101 - Manufacturing Engineering
Original Release Date
19/08/2014
Nominal Hours
40
Description
This unit covers contributing to basic mechanical system design, and selecting the components and mechanical features required to perform simple functions.
Notes
Elements and Performance Criteria
1. Research equipment function and operational requirements
  • 1.1. All relevant drawings, specifications, manuals and documentation are obtained in accordance with workplace procedures.
  • 1.2. Appropriate personnel are consulted to determine requirements.
  • 1.3. Information collected is interpreted and draft functional and operational requirements are prepared and verified with supervisor or design team.
2. Prepare a preliminary sketch/drawing/ specification
  • 2.1. Appropriate components, assemblies and fasteners are selected to perform the required function.
  • 2.2. Where required, components and/or materials are selected from supplier/manufacturer catalogues.
  • 2.3. Appropriate and relevant codes are applied to the sketch/drawing/specification in accordance with workplace procedures.
  • 2.4. The preliminary sketch/drawing/specification is referred to a higher authority for approval in accordance with policy and procedures.
3. Issue or file completed sketch/drawing/specification list as required
  • 3.1. Approved sketch/drawing/specification is stored and catalogued in accordance with standard operating procedures.
  • 3.2. Approved sketch/drawing/specification is issued in accordance with standard operating procedures.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Components, assemblies and fasteners
May include shafts, seals, bearings, fasteners, splines, cam, lifting systems, pneumatic circuits, hydraulic circuits, piping systems
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to contribute to the design of basic mechanical systems. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with contributing to the design of basic mechanical systems, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
State Code National Code Title Type
OEW12 MEM30009 Contribute to the design of basic mechanical systems Unit of competency