Unit of competency Outline

Date retreived
22/07/2026 11:26 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service and repair drum cutting systems

Service and repair drum cutting systems

Unit of competency
National Code
AURPTA104
State Code
OCL50
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030503 - Vehicle Mechanics
Original Release Date
31/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to service and repair faults in the drum cutting systems of outdoor power equipment according to manufacturer specifications. The unit involves preparing for the task, determining the service and repair requirements, carrying out the service and repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the outdoor power equipment service and repair industry. The drum cutting systems include push type, electric or internal combustion powered systems, and include reel mowers or gang mowers. This unit relates to the service and repair of the drum cutting system only and not the driving engine or motor.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service and repair drum cutting system
  • 1.1 Identify job requirements from workplace instructions
  • 1.2 Identify required information for service activity
  • 1.3 Identify and manage hazards associated with the tasks
  • 1.4 Select tools, equipment and materials and check for serviceability
2. Determine service and repair requirements of drum cutting system
  • 2.1 Inspect and test system according to manufacturer specifications, workplace procedures, and safety requirements
  • 2.2 Identify faults through inspection and identify causes
  • 2.3 Report inspection findings and test results according to workplace procedures, and include recommendations for necessary service, repair or adjustment
  • 2.4 Obtain authorisation to proceed with service and repair in line with recommendations
3. Carry out service and repair activities
  • 3.1 Select and check tools, equipment and materials required to conduct service and repair
  • 3.2 Remove and inspect components for serviceability according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 3.3 Fit and adjust reusable, repaired and replacement components according to manufacturer specifications and workplace procedures
4. Check drum cutting system for normal operation
  • 4.1 Operate system and compare to manufacturer specifications
  • 4.2 Make adjustments as required and re-test drum cutting system
5. Complete work processes
  • 5.1 Conduct final inspection according to workplace procedures and confirm equipment is ready for use
  • 5.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 5.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXB83 AURPTA004 Service and repair drum cutting systems Unit of competency