Unit of competency Outline

Date retreived
22/07/2026 11:50 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Finish screen print products

Finish screen print products

Unit of competency
National Code
ICPSCP281
State Code
AUP37
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
30
Description
This unit describes the skills and knowledge required to undertake finishing processes used on screen printed products not covered by converting, binding and finishing units. If the finishing is substantially guillotining, flat-bed cutting or folding, the relevant converting, binding and finishing units should be used.It applies to individuals working under direct supervision in the printing and graphic arts industry. They perform mainly routine tasks such as monitoring, adjusting and cleaning equipment, selecting appropriate products and ensuring set processes are followed in the final stages of processing screen prints.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Receive printed product
  • 1.1 Screen print job is collected or received and quality checks made according to job specifications
  • 1.2 Defects or irregularities are identified, reported and rectified where possible
2 Carry out final processing
  • 2.1 Final processing requirements of job are determined from job specifications
  • 2.2 Equipment and materials for final processing are identified and prepared according to manufacturer or supplier and job specifications
  • 2.3 Final processes are implemented according to job specifications and industry practice
  • 2.4 Quality of product is monitored and maintained throughout final processing
  • 2.5 Irregularities are identified, reported and rectified where possible
  • 2.6 Job status and progress are checked against job specifications and any necessary action is taken
3 Handle final product
  • 3.1 Final print is processed using appropriate handling, storage and dispatching techniques to ensure minimal wastage and prevent hazards to personnel
  • 3.2 Waste materials are disposed of according to manufacturer or supplier specifications, regulatory requirements and enterprise procedures
  • 3.3 Post-production cleaning and user maintenance are carried out according to manufacturer or supplier specifications
4 Store, pack and dispatch
  • 4.1 Final quality checks are carried out and appropriate action is taken according to job specifications
  • 4.2 Finished job is stored, packed and dispatched according to job specifications
No information
No information
Replaces
State Code National Code Title Type
D3224 ICPSP281C Finish screen print products Unit of competency
Replaced By
State Code National Code Title Type
OBQ55 ICPSCP2810 Finish screen print products Unit of competency