Unit of competency Outline
Date retreived
23/07/2026 5:50 PM AWST
23/07/2026 5:50 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Monitor and coordinate catchment operations
Monitor and coordinate catchment operations
Unit of competency
National Code
NWPSOU013
NWPSOU013
State Code
AVY52
AVY52
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
010711 - Hydrology
Original Release Date
15/04/2016
Nominal Hours
30
Description
This unit describes the skills required to inspect and monitor catchment areas, monitor flows and coordinate catchment processes. The ability to collect data and samples, monitor and adjust regulatory systems, identify and investigate catchment problems and produce technical reports is essential to performance.This unit applies to those working as field staff with a specific responsibility for monitoring and coordinating catchment operations. The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those related to WHS. Those undertaking this unit would work under indirect supervision while performing routine tasks ensuring minimum damage to the environment, in a familiar context. The level of responsibility may vary according to the size and complexity of the catchment area.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Inspect and monitor catchment operations
- 1.1 Schedule routine inspections of catchment areas to identify water quality risks.
- 1.2 Collect, analyse and report catchment data.
- 1.3 Collect and record water samples.
- 1.4 Monitor and report on activities within the catchment area.
- 1.5 Select, fit and use required safety equipment, including personal protective equipment.
2. Monitor inflows and outflows
- 2.1 Inspect flow regulating systems and determine required adjustments to meet demand.
- 2.2 Identify and report flows into, and conditions of, catchment areas.
3. Operate and coordinate catchment processes
- 3.1 Identify, address and, if appropriate, report problems within catchment areas.
- 3.2 Monitor and coordinate processes to maintain the parameters of operation.
- 3.3 Integrate processes to improve source performance.
4. Complete documentation
- 4.1 Review and action investigation results.
- 4.2 Compile reports from catchment inspections.
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D1905 | NWP323B | Monitor and coordinate catchment operations | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBO36 | NWPCAD006 | Monitor and coordinate catchment operations | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AYW7 | NWP30215 | Certificate III in Water Industry Operations | Qualification |