Unit of competency Outline

Date retreived
23/07/2026 3:17 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect and service electric power-assisted bicycles

Inspect and service electric power-assisted bicycles

Unit of competency
National Code
AURBTR101
State Code
OCK35
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
31/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to inspect and service electric power-assisted bicycle systems and components. The unit involves preparing for the work, selecting and using specialist tools and equipment, inspecting the bicycle condition, interpreting manufacturer specifications, performing routine maintenance and testing on electric bicycle components, and completing workplace processes and documentation. The unit applies to those working in the bicycle retail, service and repair industry. Electric power-assisted bicycles are throttle and pedal assist sensor (PAS) bicycles with 250 watts rated power at the wheel. Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare to inspect and service electric power-assisted bicycle
  • 1.1 Determine job requirements from workplace instructions
  • 1.2 Access and interpret manufacturer specifications and workplace procedures
  • 1.3 Select and check tools and equipment for serviceability
  • 1.4 Identify hazards associated with the work and manage risks
  • 1.5 Prepare work area and plan service sequence to avoid damage to bicycle, minimise waste and use time efficiently
2. Inspect bicycle
  • 2.1 Inspect condition of bicycle for faults and worn, non-serviceable or damaged parts according to workplace procedures
  • 2.2 Identify bicycle components needing repair, replacement or maintenance according to manufacturer specifications
  • 2.3 Report inspection findings, and identify and confirm service options and techniques for required repairs or adjustments
3. Service bicycle
  • 3.1 Carry out routine servicing and maintenance of bicycle according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 3.2 Carry out post-service testing and operation checks on serviced bicycle according to manufacturer specifications, and make adjustments as required
  • 3.3 Report results and quality issues to authorised personnel as required
4. Complete work processes
  • 4.1 Clean bicycle, conduct final inspection to ensure work meets workplace expectations, and confirm bicycle is ready for use
  • 4.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 4.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXE34 AURBTR001 Service electric power-assisted bicycles Unit of competency
State Code National Code Title Type
BFY4 AUR30220 Certificate III in Bicycle Workshop Operations Qualification
AE394 AURSS00062 Electric Bicycles Skill Set Skill set