Unit of competency Outline

Date retreived
22/07/2026 6:19 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform calibration checks on equipment and assist with its maintenance

Perform calibration checks on equipment and assist with its maintenance

Unit of competency
National Code
MSL933004
State Code
AWO50
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
019909 - Laboratory Technology
Original Release Date
16/08/2016
Nominal Hours
35
Description
This unit of competency covers the ability to perform set-up, pre-use and in-house calibration/validation checks on equipment and assist with its maintenance.This unit of competency is applicable to laboratory assistants working in all industry sectors.While no specific licensing or certification requirements apply to this unit at the time of publication, laboratory operations are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked.
Notes
Elements and Performance Criteria
1 Perform set-up and pre-use checks of laboratory equipment
  • 1.1 Perform laboratory equipment set-up and pre-use checks in accordance with workplace procedures
  • 1.2 Perform safety checks in accordance with relevant workplace and instrumental procedures
  • 1.3 Identify faulty or unsafe components and equipment and report to appropriate personnel
  • 1.4 Complete equipment log books/records to meet workplace requirements
2 Perform calibration checks
  • 2.1 Start up equipment according to operating procedures
  • 2.2 Use specified standards for calibration check
  • 2.3 Check equipment in accordance with calibration procedures and schedules
  • 2.4 Record all calibration data accurately and legibly
  • 2.5 Compare data with specifications and/or previous records to identify non-compliant equipment
  • 2.6 Quarantine out-of-calibration equipment
3 Assist with equipment maintenance
  • 3.1 Ensure all equipment work areas are clean during and after equipment use
  • 3.2 Perform basic maintenance in accordance with workplace procedures
  • 3.3 Clean and store equipment according to workplace and/or manufacturer's specifications/procedures
  • 3.4 Identify and replace, repair or dispose of damaged/worn equipment as appropriate
4 Maintain records
  • 4.1 Record and report information on unsafe or faulty equipment according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WA678 MSL933004A Perform calibration checks on equipment and assist with its maintenance Unit of competency
Replaced By
State Code National Code Title Type
OAC36 MSL933008 Perform calibration checks on equipment and assist with its maintenance Unit of competency