Unit of competency Outline
Date retreived
24/07/2026 12:20 AM AWST
24/07/2026 12:20 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Finish a digital product
Finish a digital product
Unit of competency
National Code
ICPPRN286
ICPPRN286
State Code
AUO39
AUO39
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
25
Description
This unit describes skills and knowledge required to finish a digital print product. This could include trimming, folding, padding, stapling, comb and wire binding.It applies to individuals who generally work under direct supervision, converting and finishing off digitally printed products in a digital environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
- 1.1 Job specifications are read and interpreted from job documentation or production control system
- 1.2 Set up is carried out correctly in minimum time with minimum wastage
- 1.3 Availability of all job related materials is checked and recorded
2. Produce test copy
- 2.1 Materials to be used for the job are identified and organised correctly
- 2.2 Equipment is set up and operated to produce a specified sample according to work health and safety (WHS) requirements, manufacturer's specifications and enterprise procedures
- 2.3 Sample is inspected and/or tested to ensure it meets job specifications and enterprise standards
- 2.4 Results are interpreted to determine adjustment requirements
- 2.5 Adjustments are carried out according to product and equipment specifications
3. Maintain finishing process
- 3.1 Finishing is maintained according to WHS requirements, manufacturer's specifications and enterprise procedures
- 3.2 Performance is monitored and verified using the process control system according to enterprise procedures
- 3.3 Finishing difficulties are anticipated and action is taken to prevent occurrence by timely intervention
- 3.4 Process adjustments to eliminate problems are reported according to enterprise procedures
- 3.5 Faulty performance of equipment is identified and reported according to enterprise procedures
- 3.6 Waste is sorted according to enterprise procedures
- 3.7 Production records or other documentation are accurately completed where required by enterprise procedures
4. Identify and rectify problems and faults
- 4.1 Problems with finishing equipment are identified and reported according to enterprise procedures
- 4.2 Adjustments or corrections are carried out according to specified procedures and are consistent with operator's skill level
- 4.3 Finishing equipment operation is checked to ensure correct operation
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D3168 | ICPPR286A | Finish a digital product | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBP84 | ICPPRN2860 | Finish a digital product | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWB3 | ICP20115 | Certificate II in Printing and Graphic Arts (General) | Qualification |