Unit of competency Outline

Date retreived
23/07/2026 4:09 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare and monitor automated operations

Prepare and monitor automated operations

Unit of competency
National Code
TLIB0006
State Code
OBR38
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
12/06/2020
View on TGA
State Implementation and Classification
Approved Date
18/08/2020
Field of Education
089901 - Purchasing, Warehousing And Distribution
Original Release Date
18/08/2020
Nominal Hours
35
Description
This unit involves the skills and knowledge required to prepare and monitor automated equipment for automated operation.It includes following relevant workplace procedures; and selecting, testing and monitoring of automated plant and equipment.Work is performed under limited or minimum supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for automated operation
  • 1.1 Hazards are identified; risks assessed and appropriate control measures are implemented
  • 1.2 Traffic flow, weather and work area conditions are assessed and appropriate actions taken in accordance with workplace procedures
  • 1.3 Communication method is trialled and confirmed in accordance with workplace procedures
  • 1.4 Job task and equipment configurations are determined in accordance with workplace procedures
2 Select, inspect and prepare automated equipment for operation
  • 2.1 Load characteristics are taken into account to ensure appropriate automated equipment is selected in accordance with workplace procedures and manufacturer specifications
  • 2.2 Automated equipment pre-operational checks are conducted in accordance with manufacturer specifications and workplace procedures
  • 2.3 All relevant automated equipment functions and safety checks are conducted and any faults reported in accordance with workplace procedures
3 Monitor automated equipment operation
  • 3.1 Dangerous goods (DG) and hazardous materials are identified and handled in accordance with codes of practice and workplace procedures
  • 3.2 Location of load is confirmed and communicated in accordance with workplace procedures and load plan
  • 3.3 Relevant persons are advised of commencement of automated operation
  • 3.4 Continuous monitoring of automated equipment operation is undertaken in accordance with workplace procedures and manufacturer specifications
No information
No information
No information