Unit of competency Outline

Date retreived
24/07/2026 5:18 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect motorsport vehicles and equipment for compliance

Inspect motorsport vehicles and equipment for compliance

Unit of competency
National Code
AURMO3004A
State Code
D7627
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
27/09/2011
Field of Education
030503 - Vehicle Mechanics
Original Release Date
27/09/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to inspect competition vehicles and safety equipment for compliance with applicable motorsport rules and regulations. It also includes inspecting the drivers' documents, clothing and equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for scrutineering
  • 1.1. Be conversant with rules and regulations governing vehicle and driver eligibility and safety criteria for the event
  • 1.2. Ensure the scrutineering bay has all necessary tools and equipment to perform tests and measurements
  • 1.3. Assess and confirm that safety and other risk management issues are within acceptable levels, within own area of responsibility
  • 1.4. Ensure all necessary documentation is on hand
  • 1.5. Report any concerns promptly to Chief Scrutineer or Clerk of Course
  • 1.6. Attend pre-event briefing session
2. Confirm driver eligibility
  • 2.1. Examine each driver's documents to confirm status and eligibility for the event
  • 2.2. Examine each driver's clothing and equipment for compliance with safety specifications
3. Confirm vehicle compliance
  • 3.1. Examine each vehicle to ensure it complies with mechanical and safety specifications for the event
  • 3.2. Complete an inspection report for each vehicle
  • 3.3. Document any discrepancies in log book
  • 3.4. Impound defective parts, components or whole vehicles, where necessary
4. Monitor vehicle compliance
  • 4.1. Observe vehicles in the assembly and starting areas to identify any mechanical or safety problems
  • 4.2. Oversee work done on vehicle during pit stops to ensure it is in accordance with relevant rules and regulations
  • 4.3. Examine vehicle damage after an incident to ascertain roadworthiness for re-entry into the event
  • 4.4. Prepare damage reports on vehicles and note logbook, as required
5. Communicate decisions and complete reports
  • 5.1. Advise Chief Scrutineer or Clerk of Course of any breach of compliance
  • 5.2. Manage the reactions of participants to decisions in accordance with rules, regulations and Officials Code of Conduct
  • 5.3. Ensure inspection reports are completed accurately and signed
  • 5.4. Complete a scrutineer's report at the end of the event
No information
No information
Replaced By
State Code National Code Title Type
WF264 AURMLA3003 Inspect motorsport vehicles and equipment for compliance Unit of competency
No information