Unit of competency Outline

Date retreived
24/07/2026 12:46 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate circular saw

Operate circular saw

Unit of competency
National Code
MTMP2037B
State Code
W6916
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/02/2008
View on TGA
State Implementation and Classification
Approved Date
26/07/2010
Field of Education
030717 - Plant And Machine Operations
Original Release Date
26/07/2010
Nominal Hours
10
Description
This unit covers the skills and knowledge required to operate and maintain a circular saw to perform a task such as cutting horns.
Notes
Elements and Performance Criteria
1. Operate circular saw
  • 1.1. Circular saw is operated in accordance with workplace requirements.
  • 1.2. Occupational Health and Safety (OH&S) requirements are identified and met.
  • 1.3. Operating equipment is sterilised and cleaned in accordance with workplace requirements.
  • 1.4. Possible sources of contamination and cross-contamination are identified.
2. Maintain a circular saw
  • 2.1. Circular saw is maintained according to manufacturer's specifications and workplace requirements.
3. Remove horns or other off-cuts
  • 3.1. Horns or off-cuts are removed using appropriate equipment in accordance with workplace requirements.
  • 3.2. Off-cuts are disposed of according to workplace requirements.
  • 3.3. Work area is kept neat and clear of waste in accordance with workplace requirements.
No information
No information
Replaces
State Code National Code Title Type
E1550 MTMP2037A Operate circular saw Unit of competency
Replaced By
State Code National Code Title Type
D8797 MTMP2037C Operate circular saw Unit of competency
No information